Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

LG Gas Stove Spark Electrode Replacement, Center #EAD60700502

03:58
78k
217
This video provides step-by-step repair instructions for replacing the center spark electrode on an LG gas range. The most common reason for replacing the spark electrode is when the range burner has trouble producing a spark.

All of the information for this center spark electrode replacement video is applicable to the following brands:
LG

Tools needed: Phillips head screwdriver, putty knife

Step By Step Instructions

1
Before you replace the center spark electrode assembly in your range first unplug the power cord
2
Now lift off the three grates.
3
Next, remove all of the burner caps and the burner bases.
4
Use a phillips-head screwdriver to unthread the fifteen screws securing the main top to the orifice holders.
5
Now insert a putty knife under the main top to release the retaining clips.
6
You can now fully remove the main top.
7
Disconnect the spark electrode wire from the spark module and release the wire from the retainers.
8
Unthread the screw securing the electrode mounting bracket.
9
Straighten the retaining tab and remove the old spark electrode assembly.
10
Install the new spark electrode assembly by positioning the electrode and bracket in the orifice holder.
11
Bend the retaining tab and replace the screw to secure.
12
Connect the wire to the spark module and secure it in the retainers.
13
Reposition and lower the main top.
14
Making sure the orifice holders and spark electrodes protrude through the openings, snap the main top into place.
15
Rethread the screws to secure the orifice holders to the main top.
16
Replace the burner bases making sure the spark electrodes align with the holes.
17
Position the burner caps.
18
Replace the burner grates plug the power cord back in and your range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the center spark electrode on an LG gas range. The most common reason for replacing the spark electrode is when the range burner has trouble producing a spark.

All of the information for this center spark electrode replacement video is applicable to the following brands:
LG

Tools needed: Phillips head screwdriver, putty knife
Step-By-Step Instructions
1
Before you replace the center spark electrode assembly in your range first unplug the power cord
2
Now lift off the three grates.
3
Next, remove all of the burner caps and the burner bases.
4
Use a phillips-head screwdriver to unthread the fifteen screws securing the main top to the orifice holders.
5
Now insert a putty knife under the main top to release the retaining clips.
6
You can now fully remove the main top.
7
Disconnect the spark electrode wire from the spark module and release the wire from the retainers.
8
Unthread the screw securing the electrode mounting bracket.
9
Straighten the retaining tab and remove the old spark electrode assembly.
10
Install the new spark electrode assembly by positioning the electrode and bracket in the orifice holder.
11
Bend the retaining tab and replace the screw to secure.
12
Connect the wire to the spark module and secure it in the retainers.
13
Reposition and lower the main top.
14
Making sure the orifice holders and spark electrodes protrude through the openings, snap the main top into place.
15
Rethread the screws to secure the orifice holders to the main top.
16
Replace the burner bases making sure the spark electrodes align with the holes.
17
Position the burner caps.
18
Replace the burner grates plug the power cord back in and your range should be ready for use.

Applicable Product Model

Parts Needed
Recommended Tools and Accessories
Total$0.00

Related Articles & Videos