Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

LG Gas Range Oven Door Switch Replacement #EBF60663401

03:27
7.5k
24
This video provides step-by-step repair instructions for replacing the oven door switch on an LG gas range. The most common reason for replacing the oven door switch is when the oven light doesn’t work.

All of the information for this oven door switch replacement video is applicable to the following brands:
LG

Tools needed: Phillips head screwdriver, putty knife, flat head screwdriver

Step By Step Instructions

1
Before you replace the oven door switch on your range first unplug the power cord.
2
Now lift off the three grates.
3
Next, remove all of the burner caps and the burner bases.
4
Use a phillips-head screwdriver to unthread the fifteen screws securing the main top to the orifice holders.
5
Now insert a putty knife under the main top to release the retaining clips.
6
You can now fully remove the main top.
7
Open the oven door and use a flathead screwdriver to depress the retaining tabs to release the door switch from the frame.
8
Disconnect the wires to fully remove the old switch.
9
Install the new oven door switch by first connecting the wires to the terminals then snap the switch into place in the frame.
10
Reposition and lower the main top.
11
Making sure the orifice holders and spark electrodes protrude through the openings, snap the main top into place.
12
Rethread the screws to secure the orifice holders to the main top.
13
Replace the burner bases making sure the spark electrodes align with the holes.
14
Position the burner caps.
15
Replace the burner grates.
16
With the repair completed plug the power cord back in and your range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the oven door switch on an LG gas range. The most common reason for replacing the oven door switch is when the oven light doesn’t work.

All of the information for this oven door switch replacement video is applicable to the following brands:
LG

Tools needed: Phillips head screwdriver, putty knife, flat head screwdriver
Step-By-Step Instructions
1
Before you replace the oven door switch on your range first unplug the power cord.
2
Now lift off the three grates.
3
Next, remove all of the burner caps and the burner bases.
4
Use a phillips-head screwdriver to unthread the fifteen screws securing the main top to the orifice holders.
5
Now insert a putty knife under the main top to release the retaining clips.
6
You can now fully remove the main top.
7
Open the oven door and use a flathead screwdriver to depress the retaining tabs to release the door switch from the frame.
8
Disconnect the wires to fully remove the old switch.
9
Install the new oven door switch by first connecting the wires to the terminals then snap the switch into place in the frame.
10
Reposition and lower the main top.
11
Making sure the orifice holders and spark electrodes protrude through the openings, snap the main top into place.
12
Rethread the screws to secure the orifice holders to the main top.
13
Replace the burner bases making sure the spark electrodes align with the holes.
14
Position the burner caps.
15
Replace the burner grates.
16
With the repair completed plug the power cord back in and your range should be ready for use.

Applicable Product Model

Parts Needed
Total$0.00

Related Articles & Videos