DescriptionThis video provides step-by-step repair instructions for replacing the oven sensor on an LG gas range. The most common reasons for replacing the oven sensor are when the oven doesn’t heat properly or doesn’t bake evenly.
All of the information for this oven sensor replacement video is applicable to the following brands:
LG
Tools needed: Phillips head screwdriver
Step-By-Step Instructions1
Before you replace the oven sensor in your range first unplug the power cord.
2
Open the oven door and use a phillips-head screwdriver to unthread the mounting screws securing the sensor.
3
Pull the wire connecter through the hole in the rear panel and disconnect it.
4
Be aware that you may need to remove the lower rear access panel to reach the wire connecter.
5
Install the new oven sensor by first connecting the wire connector then position the sensor on the wall and replace the screws to secure.
6
With the repair completed plug the power cord back in and your range should be ready for use.