GE Dishwasher Dispenser Cover Replacement #WD16X297

02:39
48k
180
This video provides step-by-step instructions for replacing a dispenser cover on GE dishwashers. The most common reason for replacing a cover is if it is cracked or broken.

All of the information in this dispenser cover replacement video is applicable to the following brands: GE

Step By Step Instructions

1
Before you replace the detergent dispenser cover in your dishwasher be sure to turn off the power to the appliance.
2
Use a phillips-head screwdriver to unthread the screws securing the inner panel to the door frame.
3
Remove the panel.
4
Pull out the retaining pin and use needle-nose pliers to depress the tabs to detach the dispenser lever and cover.
5
Prepare the new detergent dispenser cover for installation by inserting the lever.
6
Make sure the actuator arm and spring are intact on the inner panel.
7
Keeping the lever aligned on the new cover, insert the lever through the panel and snap it into place in the actuator arm.
8
Insert the retaining pin to secure the lever.
9
Now realign the panel in the door frame and rethread the screws to secure.
10
Turn the power supply back on and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing a dispenser cover on GE dishwashers. The most common reason for replacing a cover is if it is cracked or broken.

All of the information in this dispenser cover replacement video is applicable to the following brands: GE
Step-By-Step Instructions
1
Before you replace the detergent dispenser cover in your dishwasher be sure to turn off the power to the appliance.
2
Use a phillips-head screwdriver to unthread the screws securing the inner panel to the door frame.
3
Remove the panel.
4
Pull out the retaining pin and use needle-nose pliers to depress the tabs to detach the dispenser lever and cover.
5
Prepare the new detergent dispenser cover for installation by inserting the lever.
6
Make sure the actuator arm and spring are intact on the inner panel.
7
Keeping the lever aligned on the new cover, insert the lever through the panel and snap it into place in the actuator arm.
8
Insert the retaining pin to secure the lever.
9
Now realign the panel in the door frame and rethread the screws to secure.
10
Turn the power supply back on and your dishwasher should be ready for use.

Applicable Product Model

Parts Needed
Recommended Tools and Accessories
Cleaner
Cleaner
$21.94
Total$0.00

Related Articles & Videos

07:57
58k
253
Part Replacement
GE Dishwasher Drain Shaft Seal Replacement #WD8X181
07:34
42k
135
Part Replacement
GE Dishwasher Pump & Motor Assembly Replacement #WD26X10013
07:03
22k
98
Part Replacement
GE Dishwasher Drain Solenoid Kit Installation #WD21X10060
10:13
11k
39
Part Replacement
GE Dishwasher Impeller & Seal Kit Installation #WD19X10032