Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Payne Furnace Flame Rollout Switch Replacement #HH680348

02:07
15k
20
This video provides step-by-step instructions for replacing the flame rollout switch on Payne furnaces. The most common reason for replacing the rollout switch is the burners igniting and then shutting off repeatedly.

All of the information in this flame rollout switch replacement video is applicable to the following brands: Payne

Tools used: flat head screwdriver, quarter inch socket

Step By Step Instructions

1
Before you replace a flame rollout switch in your furnace first turn off the power to the furnace
2
Shut off the gas supply.
3
Use a flat-head screwdriver to unthread the screws securing the upper access panel and remove the panel.
4
Disconnect the wires from the rollout switch you’re replacing.
5
Now use a quarter-inch socket or wrench to unthread the mounting screws to release the old switch.
6
Install the new flame rollout switch by positioning it on the burner box and thread the mounting screws to secure.
7
Connect the wires to the terminals on the new switch.
8
Realign the upper access panel and tighten the screws to secure.
9
With the repair completed, turn the gas supply back on as well as the power and your furnace should be ready for use.
Description
This video provides step-by-step instructions for replacing the flame rollout switch on Payne furnaces. The most common reason for replacing the rollout switch is the burners igniting and then shutting off repeatedly.

All of the information in this flame rollout switch replacement video is applicable to the following brands: Payne

Tools used: flat head screwdriver, quarter inch socket
Step-By-Step Instructions
1
Before you replace a flame rollout switch in your furnace first turn off the power to the furnace
2
Shut off the gas supply.
3
Use a flat-head screwdriver to unthread the screws securing the upper access panel and remove the panel.
4
Disconnect the wires from the rollout switch you’re replacing.
5
Now use a quarter-inch socket or wrench to unthread the mounting screws to release the old switch.
6
Install the new flame rollout switch by positioning it on the burner box and thread the mounting screws to secure.
7
Connect the wires to the terminals on the new switch.
8
Realign the upper access panel and tighten the screws to secure.
9
With the repair completed, turn the gas supply back on as well as the power and your furnace should be ready for use.

Applicable Product Model

Furnace
Brand
Product Type
Model
Subtype
Total$0.00

Related Articles & Videos