Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Frigidaire Dishwasher Rack Stop Kit Installation #5304475595

01:45
1.7k
3
This video provides step-by-step instructions for installing the rack stop kit on Frigidaire dishwashers. The most common reason for replacing the rack stops is if they are broken and the dish rack will not stay on the rails.

All of the information in this rack stop replacement video is applicable to the following brands: Frigidaire

Tools used: flat head screwdriver, pliers

Step By Step Instructions

1
To replace the front and rear rack stops in your dishwasher first slide out the upper dish rack and remove it.
2
Use a small flat-head screwdriver to depress the retaining tab to release the old rear rack stop from the support rail.
3
Slide off the rail.
4
Use the screwdriver to bend out the rail tabs securing the front stop this may require some effort.
5
Remove the stop.
6
Install the new front rack stop by snapping it into the support rail then use pliers to bend the tabs in to secure.
7
Slide the support rail onto the rollers and snap the new rear rack stop into place on the rail.
8
Reposition the upper rack on the rails slide it into place and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for installing the rack stop kit on Frigidaire dishwashers. The most common reason for replacing the rack stops is if they are broken and the dish rack will not stay on the rails.

All of the information in this rack stop replacement video is applicable to the following brands: Frigidaire

Tools used: flat head screwdriver, pliers
Step-By-Step Instructions
1
To replace the front and rear rack stops in your dishwasher first slide out the upper dish rack and remove it.
2
Use a small flat-head screwdriver to depress the retaining tab to release the old rear rack stop from the support rail.
3
Slide off the rail.
4
Use the screwdriver to bend out the rail tabs securing the front stop this may require some effort.
5
Remove the stop.
6
Install the new front rack stop by snapping it into the support rail then use pliers to bend the tabs in to secure.
7
Slide the support rail onto the rollers and snap the new rear rack stop into place on the rail.
8
Reposition the upper rack on the rails slide it into place and your dishwasher should be ready for use.

Applicable Product Model

Parts Needed
Recommended Tools and Accessories
Cleaner
Cleaner
$21.30
Total$0.00

Related Articles & Videos