Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more
Frigidaire Dishwasher Support Rail Replacement #5304475596
Skill Level
Total Parts Cost
$49.00Estimated Savings
$112.5001:32
1.9k
4
- Description
This video provides step-by-step instructions for replacing the support rail on Frigidaire dishwashers. The most common reason for replacing the support rail is the dish rack not sliding out smoothly.
All of the information in this support rail replacement video is applicable to the following brands: Frigidaire
Tools used: flat head screwdriver
All of the information in this support rail replacement video is applicable to the following brands: Frigidaire
Tools used: flat head screwdriver
Step By Step Instructions
1
To replace an upper dish rack support rail in your dishwasher first slide out the upper rack and remove it.
2
Use a small flat-head screwdriver to depress the retaining tab to release the rear rack stop from the support rail.
3
Slide off the rail.
4
Use the screwdriver to bend out the rail tabs securing the front stop and remove the stop.
5
Prepare the new support rail for installation by snapping in the front rack stop.
6
Slide the new rail onto the rollers and snap the rear rack stop into place.
7
Reposition the upper rack on the rails slide it into place and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the support rail on Frigidaire dishwashers. The most common reason for replacing the support rail is the dish rack not sliding out smoothly.
All of the information in this support rail replacement video is applicable to the following brands: Frigidaire
Tools used: flat head screwdriver
All of the information in this support rail replacement video is applicable to the following brands: Frigidaire
Tools used: flat head screwdriver
Step-By-Step Instructions
1
To replace an upper dish rack support rail in your dishwasher first slide out the upper rack and remove it.
2
Use a small flat-head screwdriver to depress the retaining tab to release the rear rack stop from the support rail.
3
Slide off the rail.
4
Use the screwdriver to bend out the rail tabs securing the front stop and remove the stop.
5
Prepare the new support rail for installation by snapping in the front rack stop.
6
Slide the new rail onto the rollers and snap the rear rack stop into place.
7
Reposition the upper rack on the rails slide it into place and your dishwasher should be ready for use.
Applicable Product Model
About Us
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
© 2022 RepairClinic.com1‑800‑269‑2609
