Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Frigidaire Dishwasher Water Supply Tube Replacement 5304475646

02:06
3.7k
6
This video provides step-by-step instructions for replacing the water supply tube on Frigidaire dishwashers. The most common reason for replacing the water supply tube is the dishwasher not cleaning properly.

All of the information in this water supply tube replacement video is applicable to the following brands: Frigidaire

Tools used: none

Step By Step Instructions

1
To replace the water supply tube in your dishwasher first slide out the upper dish rack and remove it.
2
Now slide out the lower dish rack.
3
Next, detach the water supply tube assembly from the mounting brackets on the top and rear of the tub.
4
Now rotate the old water supply tube to release it from the pump assembly.
5
Prepare the new water supply tube for installation by transferring the upper wash arm from the old tube to the new one.
6
To do this, rotate the locking ring clockwise to release the arm.
7
Remove the locking ring and position it on the new wash arm support with the flat side facing the connecter.
8
Align the wash arm on the support and rotate the locking ring counter-clockwise to secure the arm.
9
Now insert the bottom of the new water supply tube into the pump assembly and rotate the tube to secure.
10
Snap the new tube into the mounting brackets on the rear and top of the tub.
11
Replace the lower dish rack.
12
Reposition the upper rack on the rails slide it into place and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the water supply tube on Frigidaire dishwashers. The most common reason for replacing the water supply tube is the dishwasher not cleaning properly.

All of the information in this water supply tube replacement video is applicable to the following brands: Frigidaire

Tools used: none
Step-By-Step Instructions
1
To replace the water supply tube in your dishwasher first slide out the upper dish rack and remove it.
2
Now slide out the lower dish rack.
3
Next, detach the water supply tube assembly from the mounting brackets on the top and rear of the tub.
4
Now rotate the old water supply tube to release it from the pump assembly.
5
Prepare the new water supply tube for installation by transferring the upper wash arm from the old tube to the new one.
6
To do this, rotate the locking ring clockwise to release the arm.
7
Remove the locking ring and position it on the new wash arm support with the flat side facing the connecter.
8
Align the wash arm on the support and rotate the locking ring counter-clockwise to secure the arm.
9
Now insert the bottom of the new water supply tube into the pump assembly and rotate the tube to secure.
10
Snap the new tube into the mounting brackets on the rear and top of the tub.
11
Replace the lower dish rack.
12
Reposition the upper rack on the rails slide it into place and your dishwasher should be ready for use.

Applicable Product Model

Parts Needed
Total$0.00

Related Articles & Videos