Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Electrolux Electric Dryer Cabinet Thermal Limit #137515200

02:01
2.4k
4
This video provides step-by-step instructions for replacing the cabinet thermal limit on Electrolux electric dryers. The most common reason for replacing the thermal limit is if the dryer won't dry or takes too long to dry.

Parts used: #2 square bit, phillips head screwdriver, flat head screwdriver

All of the information in this thermal limit replacement video is applicable to the following brands: Electrolux

Step By Step Instructions

1
Before you replace the cabinet thermal limit in your dryer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screw to release the rear access panel.
3
Unthread the thermal limit mounting screws.
4
Disconnect the wires to remove the old limit.
5
Install the new cabinet thermal limit by first connecting the wires to the terminals.
6
Position the thermal limit on the rear bulkhead then thread and tighten the screws to secure.
7
Replace the rear access panel and secure it with the screw.
8
With the repair completed plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step instructions for replacing the cabinet thermal limit on Electrolux electric dryers. The most common reason for replacing the thermal limit is if the dryer won't dry or takes too long to dry.

Parts used: #2 square bit, phillips head screwdriver, flat head screwdriver

All of the information in this thermal limit replacement video is applicable to the following brands: Electrolux
Step-By-Step Instructions
1
Before you replace the cabinet thermal limit in your dryer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screw to release the rear access panel.
3
Unthread the thermal limit mounting screws.
4
Disconnect the wires to remove the old limit.
5
Install the new cabinet thermal limit by first connecting the wires to the terminals.
6
Position the thermal limit on the rear bulkhead then thread and tighten the screws to secure.
7
Replace the rear access panel and secure it with the screw.
8
With the repair completed plug the power cord back in and your dryer should be ready for use.

Applicable Product Model

Dryer
Brand
Product Type
Model
Subtype
Electric
Product Diagram & Manuals
Parts Needed
Total$0.00

Related Articles & Videos