Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more
Electrolux Electric Dryer Filter Housing Cover #137560800
Skill Level
Total Parts Cost
$36.46Estimated Savings
$112.5001:57
4.6k
3
- Description
This video provides step-by-step instructions for replacing the filter housing cover on Electrolux electric dryers. The most common reason for replacing the cover is if it is cracked.
Parts used: #2 square bit, Phillips head screwdriver, flat head screwdriver
All of the information in this cover replacement video is applicable to the following brands: Electrolux
Parts used: #2 square bit, Phillips head screwdriver, flat head screwdriver
All of the information in this cover replacement video is applicable to the following brands: Electrolux
Step By Step Instructions
1
Before you replace the lint filter housing cover on your dryer be sure to unplug the power cord.
2
Open the dryer door and remove the lint filter.
3
Use a number two square bit or a phillips-head screwdriver to unthread the four mounting screws securing the old lint filter housing cover.
4
Lift out the old cover.
5
Install the new lint filter housing cover by aligning it on the front bulkhead.
6
Thread and tighten the screws to secure.
7
Insert the lint filter and close the dryer door.
8
With the repair completed plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step instructions for replacing the filter housing cover on Electrolux electric dryers. The most common reason for replacing the cover is if it is cracked.
Parts used: #2 square bit, Phillips head screwdriver, flat head screwdriver
All of the information in this cover replacement video is applicable to the following brands: Electrolux
Parts used: #2 square bit, Phillips head screwdriver, flat head screwdriver
All of the information in this cover replacement video is applicable to the following brands: Electrolux
Step-By-Step Instructions
1
Before you replace the lint filter housing cover on your dryer be sure to unplug the power cord.
2
Open the dryer door and remove the lint filter.
3
Use a number two square bit or a phillips-head screwdriver to unthread the four mounting screws securing the old lint filter housing cover.
4
Lift out the old cover.
5
Install the new lint filter housing cover by aligning it on the front bulkhead.
6
Thread and tighten the screws to secure.
7
Insert the lint filter and close the dryer door.
8
With the repair completed plug the power cord back in and your dryer should be ready for use.
Applicable Product Model
About Us
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
© 2022 RepairClinic.com1‑800‑269‑2609
