Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Electrolux Electric Dryer Replace Curved Drum Baffle #137610500

02:10
1.3k
2
This video provides step-by-step instructions for replacing the curved drum baffle on Electrolux electric dryers. The most common reason for replacing the baffle is if it is broken or missing.

Parts used: #2 square bit, Phillips head screwdriver, flat head screwdriver

All of the information in this curved baffle replacement video is applicable to the following brands: Electrolux

Step By Step Instructions

1
Before you replace the curved drum baffle in your dryer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screws at the back securing the main top.
3
Slide the main top back and lift it up to remove.
4
Open the dryer door and rotate the drum so you can access the mounting screws securing the baffle.
5
Unthread the screws to release the old baffle.
6
Install the new drum baffle by positioning it on the inside of the drum then thread and tighten the mounting screws.
7
Realign the main top and slide it into place.
8
Rethread the screws in the back.
9
With the repair completed plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step instructions for replacing the curved drum baffle on Electrolux electric dryers. The most common reason for replacing the baffle is if it is broken or missing.

Parts used: #2 square bit, Phillips head screwdriver, flat head screwdriver

All of the information in this curved baffle replacement video is applicable to the following brands: Electrolux
Step-By-Step Instructions
1
Before you replace the curved drum baffle in your dryer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screws at the back securing the main top.
3
Slide the main top back and lift it up to remove.
4
Open the dryer door and rotate the drum so you can access the mounting screws securing the baffle.
5
Unthread the screws to release the old baffle.
6
Install the new drum baffle by positioning it on the inside of the drum then thread and tighten the mounting screws.
7
Realign the main top and slide it into place.
8
Rethread the screws in the back.
9
With the repair completed plug the power cord back in and your dryer should be ready for use.

Applicable Product Model

Dryer
Brand
Product Type
Model
Subtype
Electric
Product Diagram & Manuals
Parts Needed
Total$0.00

Related Articles & Videos