Electrolux Washer Pressure Switch Replacement #134762010

02:14
15k
23
This video provides step-by-step repair instructions for replacing the pressure switch on an Electrolux washing machine. The most common reason for replacing the switch is if the wash cycle will not advance.

All of the information for this pressure switch replacement video is applicable to the following brands:
Electrolux

Tools needed: #2 square bit

Step By Step Instructions

1
Before you replace the pressure switch in your washer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screws at the back securing the main top.
3
Slide the main top back and lift it up to remove.
4
Rotate the old pressure switch to detach it from the frame.
5
Disconnect the wire connecter.
6
Release the spring clamp and pull off the pressure hose.
7
Install the new pressure switch by attaching the pressure hose and securing it with the clamp.
8
Connect the wire connecter.
9
Now align the switch on the frame and rotate to lock it into place.
10
Realign the main top and slide it into place.
11
Rethread the screws in the back. With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the pressure switch on an Electrolux washing machine. The most common reason for replacing the switch is if the wash cycle will not advance.

All of the information for this pressure switch replacement video is applicable to the following brands:
Electrolux

Tools needed: #2 square bit
Step-By-Step Instructions
1
Before you replace the pressure switch in your washer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screws at the back securing the main top.
3
Slide the main top back and lift it up to remove.
4
Rotate the old pressure switch to detach it from the frame.
5
Disconnect the wire connecter.
6
Release the spring clamp and pull off the pressure hose.
7
Install the new pressure switch by attaching the pressure hose and securing it with the clamp.
8
Connect the wire connecter.
9
Now align the switch on the frame and rotate to lock it into place.
10
Realign the main top and slide it into place.
11
Rethread the screws in the back. With the repair completed plug the power cord back in and your washer should be ready for use.

Applicable Product Model

Washing Machine
Brand
Product Type
Model
Subtype
Front Loading
Product Diagram & Manuals
Parts Needed
Recommended Tools and Accessories
Cleaner
Cleaner
$8.99
Total$0.00

Related Articles & Videos

07:24
135k
348
Part Replacement
Electrolux Door Boot Seal Replacement #134616100
06:49
103k
249
Part Replacement
Electrolux Washer Drain Pump Replacement #137240800
06:26
58k
174
Part Replacement
Electrolux Water Inlet Valve Replacement #134637810
07:08
25k
65
Part Replacement
Electrolux Washing Machine Drive Motor Replacement #134638900