Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Electrolux Washer Heating Element Replacement #137488301

02:46
12k
14
This video provides step-by-step repair instructions for replacing the heating element on an Electrolux washing machine. The most common reason for replacing the element is the water not getting hot enough during the wash cycle.

All of the information for this heating element replacement video is applicable to the following brands:
Electrolux

Tools needed: phillips head screwdriver, #2 square bit, 10mm deep well socket

Step By Step Instructions

1
Before you replace the heating element in your washer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screws securing the rear access panel
3
Set the panel aside
4
Note the orientation of the wires connected to the heating element then disconnect them.
5
Use a 10mm deep-well socket to unthread the mounting nut securing the heating element.
6
Use a flat-head screwdriver to help pry out the old element.
7
Install the new heating element by inserting it firmly into the tub.
8
Tighten the mounting nut.
9
Connect the wires to the appropriate terminals.
10
Reposition the rear access panel.
11
Thread and tighten the screws to secure.
12
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the heating element on an Electrolux washing machine. The most common reason for replacing the element is the water not getting hot enough during the wash cycle.

All of the information for this heating element replacement video is applicable to the following brands:
Electrolux

Tools needed: phillips head screwdriver, #2 square bit, 10mm deep well socket
Step-By-Step Instructions
1
Before you replace the heating element in your washer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screws securing the rear access panel
3
Set the panel aside
4
Note the orientation of the wires connected to the heating element then disconnect them.
5
Use a 10mm deep-well socket to unthread the mounting nut securing the heating element.
6
Use a flat-head screwdriver to help pry out the old element.
7
Install the new heating element by inserting it firmly into the tub.
8
Tighten the mounting nut.
9
Connect the wires to the appropriate terminals.
10
Reposition the rear access panel.
11
Thread and tighten the screws to secure.
12
With the repair completed plug the power cord back in and your washer should be ready for use.

Applicable Product Model

Washing Machine
Brand
Product Type
Model
Subtype
Front Loading
Product Diagram & Manuals
Parts Needed
Recommended Tools and Accessories
Cleaner
Cleaner
$8.99
Cleaner
Cleaner
$17.01
Cleaner
Cleaner
$22.37
Total$0.00

Related Articles & Videos