Orders placed by 8:00 p.m. ET Monday through Friday will ship the same day.

Honda Lawn Mower Replace Grass Bag Frame Part # 81330-VL0-P00

01:25
3.2k
1
This video provides step-by-step repair instructions for replacing the grass bag frame on a Honda lawn mower. The most common reason for replacing the grass bag frame is when it is damaged.

All of the information for this grass bag frame replacement video is applicable to the following brands:
Honda

Tools needed: none

Step By Step Instructions

1
To replace a handle lock collar on your lawn mower first remove the grass bag if applicable.
2
Rotate the handle lock knobs a quarter-turn to release the lock pins.
3
Lift the handle up.
4
Rotate the applicable knob another quarter-turn to release the spring tension then use a 1/16th inch punch and a rubber mallet to knock out the roll pin securing the knob.
5
Remove the knob and lock pin assembly.
6
If still intact, remove the old collar.
7
Install the new handle lock collar by inserting it into the hole on the inside of the handle.
8
Making sure the spring is positioned on the lock pin, insert the pin into the collar.
9
Now align the hole in the knob with the hole in the lock pin.
10
Insert the roll pin and use the punch and mallet to knock it into place.
11
Rotate the knob a quarter-turn
12
Lower the handle to the desired position then rotate both knobs a quarter-turn to secure.
Description
This video provides step-by-step repair instructions for replacing the grass bag frame on a Honda lawn mower. The most common reason for replacing the grass bag frame is when it is damaged.

All of the information for this grass bag frame replacement video is applicable to the following brands:
Honda

Tools needed: none
Step-By-Step Instructions
1
To replace a handle lock collar on your lawn mower first remove the grass bag if applicable.
2
Rotate the handle lock knobs a quarter-turn to release the lock pins.
3
Lift the handle up.
4
Rotate the applicable knob another quarter-turn to release the spring tension then use a 1/16th inch punch and a rubber mallet to knock out the roll pin securing the knob.
5
Remove the knob and lock pin assembly.
6
If still intact, remove the old collar.
7
Install the new handle lock collar by inserting it into the hole on the inside of the handle.
8
Making sure the spring is positioned on the lock pin, insert the pin into the collar.
9
Now align the hole in the knob with the hole in the lock pin.
10
Insert the roll pin and use the punch and mallet to knock it into place.
11
Rotate the knob a quarter-turn
12
Lower the handle to the desired position then rotate both knobs a quarter-turn to secure.

Applicable Product Model

Lawn Mower
Brand
Product Type
Model
Subtype
Product Diagram & Manuals
Parts Needed
Recommended Tools and Accessories
Fuel Tank
Fuel Tank
$29.18
Fuel Tank
Fuel Tank
$46.58
Total$0.00

Related Articles & Videos

04:46
209k
705
Part Replacement
Honda Lawn Mower Drive Belt Replacement Part # 22431-VL0-P01
View Solution
08:45
142k
525
Part Replacement
Honda Lawn Mower Transmission Replacement Part # 20001-VL0-P00
View Solution
08:08
164k
334
Part Replacement
Honda Lawn Mower Clutch Cable Replacement Part # 54510-VL0-P01
View Solution
01:43
77k
188
Part Replacement
Honda Lawn Mower Rear Wheel Replacement Part # 42710-VE2-M01ZE
View Solution