Orders placed by 8:00 p.m. ET Monday through Friday will ship the same day.

Honda Lawn Mower Drive Pulley Replacement Part # 75161-VL0-N00

03:46
13k
22
This video provides step-by-step repair instructions for replacing the drive pulley on a Honda lawn mower. The most common reason for replacing the pulley is if the engine runs but the lawn mower will not self-propel.

All of the information for this drive pulley replacement video is applicable to the following brands:
Honda

Tools needed: torque wrench, rubber mallet, 12mm socket

Step By Step Instructions

1
Before you replace the drive pulley on your lawn mower first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting and close the fuel valve.
3
We recommend performing this procedure with little or no fuel in the tank.
4
Now carefully tip the mower on its side with the fuel tank facing up.
5
Support the blades and use a 14mm socket to unthread the mounting bolts.
6
Remove the blades.
7
Support the blade adapter and unthread the adapter mounting bolt.
8
You can use a rubber mallet to help remove the adapter.
9
Remove the woodruff key from the drive shaft if still intact.
10
Pull the drive pulley away from the guard; unhook the belt and slide the old pulley off of the shaft.
11
Install the new drive pulley by aligning it on the shaft.
12
Loop the belt on the pulley and push the pulley into the guard.
13
Before you reinstall the blade adapter, replace the woodruff key in the drive shaft.
14
Now align the adapter on the shaft and slide it into place.
15
Thread and tighten the mounting bolt. Use a torque wrench to torque the bolt to 40 foot pounds.
16
Confirm that the washers are still in place on the mounting bolts with the cupped edge facing up.
17
Align the upper blade and the lower main blade together insert the bolts then position the assembly on the adapter.
18
Thread the bolts and torque the bolts to 40 foot pounds to secure.
19
Return the mower to its upright position.
20
With the repair completed reattach the wire and boot to the spark plug open the fuel valve refill the fuel tank and your lawn mower should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the drive pulley on a Honda lawn mower. The most common reason for replacing the pulley is if the engine runs but the lawn mower will not self-propel.

All of the information for this drive pulley replacement video is applicable to the following brands:
Honda

Tools needed: torque wrench, rubber mallet, 12mm socket
Step-By-Step Instructions
1
Before you replace the drive pulley on your lawn mower first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting and close the fuel valve.
3
We recommend performing this procedure with little or no fuel in the tank.
4
Now carefully tip the mower on its side with the fuel tank facing up.
5
Support the blades and use a 14mm socket to unthread the mounting bolts.
6
Remove the blades.
7
Support the blade adapter and unthread the adapter mounting bolt.
8
You can use a rubber mallet to help remove the adapter.
9
Remove the woodruff key from the drive shaft if still intact.
10
Pull the drive pulley away from the guard; unhook the belt and slide the old pulley off of the shaft.
11
Install the new drive pulley by aligning it on the shaft.
12
Loop the belt on the pulley and push the pulley into the guard.
13
Before you reinstall the blade adapter, replace the woodruff key in the drive shaft.
14
Now align the adapter on the shaft and slide it into place.
15
Thread and tighten the mounting bolt. Use a torque wrench to torque the bolt to 40 foot pounds.
16
Confirm that the washers are still in place on the mounting bolts with the cupped edge facing up.
17
Align the upper blade and the lower main blade together insert the bolts then position the assembly on the adapter.
18
Thread the bolts and torque the bolts to 40 foot pounds to secure.
19
Return the mower to its upright position.
20
With the repair completed reattach the wire and boot to the spark plug open the fuel valve refill the fuel tank and your lawn mower should be ready for use.

Applicable Product Model

Lawn Mower
Brand
Product Type
Model
Subtype
Product Diagram & Manuals
Parts Needed
Recommended Tools and Accessories
Fuel Tank
Fuel Tank
$29.18
Fuel Tank
Fuel Tank
$46.58
Total$0.00

Related Articles & Videos

04:46
209k
705
Part Replacement
Honda Lawn Mower Drive Belt Replacement Part # 22431-VL0-P01
View Solution
08:45
142k
525
Part Replacement
Honda Lawn Mower Transmission Replacement Part # 20001-VL0-P00
View Solution
08:08
164k
334
Part Replacement
Honda Lawn Mower Clutch Cable Replacement Part # 54510-VL0-P01
View Solution
01:43
77k
188
Part Replacement
Honda Lawn Mower Rear Wheel Replacement Part # 42710-VE2-M01ZE
View Solution