Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Honda Lawn Mower Blade Adapter Replacement Part # 06726-VG3-305

03:31
17k
41
This video provides step-by-step repair instructions for replacing the blade adapter on a Honda lawn mower. The most common reason for replacing the adapter is when the blades are not secured properly.

All of the information for this blade adapter replacement video is applicable to the following brands:
Honda

Tools needed: 12mm socket, rubber mallet, torque wrench

Step By Step Instructions

1
Before you replace the blade adapter on your lawn mower first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting and close the fuel valve.
3
We recommend performing this procedure with little or not fuel in the tank.
4
Now carefully tip the mower on its side with the fuel tank facing up.
5
Support the blades and use a 14mm socket to unthread the mounting bolts.
6
Remove the blades.
7
Support the blade adapter and unthread the adapter mounting bolt. You can use a rubber mallet to help remove the old adapter.
8
Before you install the new blade adapter replace the old woodruff key in the drive shaft with the new key.
9
Align the new adapter on the shaft and slide it into place.
10
Thread and tighten the mounting bolt. Use a torque wrench to torque the bolt to 40 foot pounds.
11
Transfer the washers from the old blade mounting bolts to the new ones keeping the cupped edge facing up.
12
Align the upper blade and the lower main blade together insert the bolts then position the assembly on the adapter.
13
Thread the bolts and torque the bolts to 40 foot pounds to secure.
14
Return the mower to its upright position.
15
With the repair completed reattach the wire and boot to the spark plug open the fuel valve refill the fuel tank and your lawn mower should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the blade adapter on a Honda lawn mower. The most common reason for replacing the adapter is when the blades are not secured properly.

All of the information for this blade adapter replacement video is applicable to the following brands:
Honda

Tools needed: 12mm socket, rubber mallet, torque wrench
Step-By-Step Instructions
1
Before you replace the blade adapter on your lawn mower first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting and close the fuel valve.
3
We recommend performing this procedure with little or not fuel in the tank.
4
Now carefully tip the mower on its side with the fuel tank facing up.
5
Support the blades and use a 14mm socket to unthread the mounting bolts.
6
Remove the blades.
7
Support the blade adapter and unthread the adapter mounting bolt. You can use a rubber mallet to help remove the old adapter.
8
Before you install the new blade adapter replace the old woodruff key in the drive shaft with the new key.
9
Align the new adapter on the shaft and slide it into place.
10
Thread and tighten the mounting bolt. Use a torque wrench to torque the bolt to 40 foot pounds.
11
Transfer the washers from the old blade mounting bolts to the new ones keeping the cupped edge facing up.
12
Align the upper blade and the lower main blade together insert the bolts then position the assembly on the adapter.
13
Thread the bolts and torque the bolts to 40 foot pounds to secure.
14
Return the mower to its upright position.
15
With the repair completed reattach the wire and boot to the spark plug open the fuel valve refill the fuel tank and your lawn mower should be ready for use.

Applicable Product Model

Lawn Mower
Brand
Product Type
Model
Subtype
Product Diagram & Manuals
Parts Needed
Recommended Tools and Accessories
Fuel Tank
Fuel Tank
$29.18
Fuel Tank
Fuel Tank
$46.58
Total$0.00

Related Articles & Videos