Orders placed by 8:00 p.m. ET Monday through Friday will ship the same day.

Honda Small Engine Carburetor Choke Control #16600-Z8B-900

02:40
66k
162
This video provides step-by-step instructions for replacing a choke control on Honda small engines. The most common reason for replacing a control is if it is damaged or missing.

All of the information in this choke control replacement video is applicable to the following brands: Honda

Tools used: 10mm socket

Step By Step Instructions

1
Before you replace the choke control assembly on your engine first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Press the retaining tabs down to release the air housing cover and set the cover and air filter aside
4
Use a 10mm socket to unthread the mounting bolts securing the air filter housing and carburetor.
5
Remove the loose components.
6
Before you install the new choke control assembly insert the bolts through the air filter housing.
7
Slide on the air cleaner gasket followed by the carburetor.
8
Now slide on the air guide gasket followed by the new choke control assembly.
9
Slide on the intake gasket then thread the bolts into the engine and tighten to secure.
10
Replace the air filter in the housing then align the lower cover tabs with the housing and snap the upper tabs into place.
11
With the repair completed reattach the wire and boot to the spark plug and your engine should be ready for use.
Description
This video provides step-by-step instructions for replacing a choke control on Honda small engines. The most common reason for replacing a control is if it is damaged or missing.

All of the information in this choke control replacement video is applicable to the following brands: Honda

Tools used: 10mm socket
Step-By-Step Instructions
1
Before you replace the choke control assembly on your engine first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Press the retaining tabs down to release the air housing cover and set the cover and air filter aside
4
Use a 10mm socket to unthread the mounting bolts securing the air filter housing and carburetor.
5
Remove the loose components.
6
Before you install the new choke control assembly insert the bolts through the air filter housing.
7
Slide on the air cleaner gasket followed by the carburetor.
8
Now slide on the air guide gasket followed by the new choke control assembly.
9
Slide on the intake gasket then thread the bolts into the engine and tighten to secure.
10
Replace the air filter in the housing then align the lower cover tabs with the housing and snap the upper tabs into place.
11
With the repair completed reattach the wire and boot to the spark plug and your engine should be ready for use.

Applicable Product Model

Parts Needed
Recommended Tools and Accessories
Fuel Tank
Fuel Tank
$29.18
Fuel Tank
Fuel Tank
$46.58
Total$0.00

Related Articles & Videos

03:32
83k
332
Part Replacement
Honda Small Engine Carburetor Replacement #16100-Z8B-901
View Solution
04:09
101k
213
Part Replacement
Honda Small Engine Throttle Return Spring #16562-ZM0-000
View Solution
02:58
73k
258
Part Replacement
Honda Thermowax Choke Actuator Replacement #16620-Z8D-305
View Solution
01:33
68k
147
Part Replacement
Honda Small Engine Fuel Filter Replacement #16952-Z8B-000
View Solution