Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Honda Small Engine Carburetor Float Bowl Screw #16028-ZK7-S91

04:08
5.2k
9
This video provides step-by-step instructions for replacing a carburetor float bowl screw on Honda small engines. The most common reason for replacing the screw is if the carburetor is leaking.

All of the information in this bowl screw replacement video is applicable to the following brands: Honda

Tools used: 10mm socket, 10mm wrench

Step By Step Instructions

1
Before you replace the float bowl screw on your engine’s carburetor first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting and close the fuel valve.
3
Press the retaining tabs down to release the air housing cover and set the cover and air filter aside
4
Use a 10mm socket to unthread the mounting bolts securing the air filter housing and carburetor.
5
Detach the filter housing from the breather tube.
6
Next, release the retaining clamp and detach the fuel line from the carburetor.
7
Disconnect the throttle return spring and the governor rod to release the carburetor.
8
Use a 10mm wrench to unthread the old screw securing the carburetor bowl.
9
Prepare the new float bowl screw for installation by sliding the provided gasket onto the screw.
10
Realign the bowl if necessary then thread and tighten the new screw to secure.
11
Reinstall the carburetor by first connecting the governor rod and throttle return spring to the throttle arm.
12
Attach the fuel line and secure with the clamp.
13
Next, attach the breather tube to the air filter housing.
14
Insert the mounting bolts through the housing.
15
Slide on the air cleaner gasket followed by the carburetor.
16
Now slide on the air guide gasket followed by the choke control assembly.
17
Slide on the intake gasket then thread the bolts into the engine and tighten to secure.
18
Replace the air filter in the housing then align the lower cover tabs with the housing and snap the upper tabs into place.
19
With the repair completed reattach the wire and boot to the spark plug open the fuel valve and your engine should be ready for use.
Description
This video provides step-by-step instructions for replacing a carburetor float bowl screw on Honda small engines. The most common reason for replacing the screw is if the carburetor is leaking.

All of the information in this bowl screw replacement video is applicable to the following brands: Honda

Tools used: 10mm socket, 10mm wrench
Step-By-Step Instructions
1
Before you replace the float bowl screw on your engine’s carburetor first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting and close the fuel valve.
3
Press the retaining tabs down to release the air housing cover and set the cover and air filter aside
4
Use a 10mm socket to unthread the mounting bolts securing the air filter housing and carburetor.
5
Detach the filter housing from the breather tube.
6
Next, release the retaining clamp and detach the fuel line from the carburetor.
7
Disconnect the throttle return spring and the governor rod to release the carburetor.
8
Use a 10mm wrench to unthread the old screw securing the carburetor bowl.
9
Prepare the new float bowl screw for installation by sliding the provided gasket onto the screw.
10
Realign the bowl if necessary then thread and tighten the new screw to secure.
11
Reinstall the carburetor by first connecting the governor rod and throttle return spring to the throttle arm.
12
Attach the fuel line and secure with the clamp.
13
Next, attach the breather tube to the air filter housing.
14
Insert the mounting bolts through the housing.
15
Slide on the air cleaner gasket followed by the carburetor.
16
Now slide on the air guide gasket followed by the choke control assembly.
17
Slide on the intake gasket then thread the bolts into the engine and tighten to secure.
18
Replace the air filter in the housing then align the lower cover tabs with the housing and snap the upper tabs into place.
19
With the repair completed reattach the wire and boot to the spark plug open the fuel valve and your engine should be ready for use.

Applicable Product Model

Parts Needed
Screw
Screw
$12.86
Total$0.00

Related Articles & Videos