1-800-269-2609 24/7
Orders placed by 8:00 p.m. ET Monday through Friday will ship the same day.
Husqvarna Leaf Blower Recoil Starter Replacement #502843101
Skill Level
Total Parts Cost
$39.41Estimated Savings
$112.5001:19
30k
52
- Description
This video provides step-by-step repair instructions for replacing the recoil starter on a Husqvarna leaf blower. The most common reasons for replacing the starter are if the rope is broken, the rope will not rewind, or the engine will not turn over when the rope is pulled.
All of the information in this recoil starter replacement video is applicable to following brands: Husqvarna
Tools used: T-27 Torx bit, flat head screwdriver
All of the information in this recoil starter replacement video is applicable to following brands: Husqvarna
Tools used: T-27 Torx bit, flat head screwdriver
Step By Step Instructions
1
Before you replace the recoil starter on your leaf blower make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a t-27 torx bit or a flat-head screwdriver to unthread the screws to release the old starter.
4
Install the new recoil starter by aligning it on the engine then replace the screws to secure.
5
With the repair completed reattach the wire and boot to the spark plug and your leaf blower should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the recoil starter on a Husqvarna leaf blower. The most common reasons for replacing the starter are if the rope is broken, the rope will not rewind, or the engine will not turn over when the rope is pulled.
All of the information in this recoil starter replacement video is applicable to following brands: Husqvarna
Tools used: T-27 Torx bit, flat head screwdriver
All of the information in this recoil starter replacement video is applicable to following brands: Husqvarna
Tools used: T-27 Torx bit, flat head screwdriver
Step-By-Step Instructions
1
Before you replace the recoil starter on your leaf blower make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a t-27 torx bit or a flat-head screwdriver to unthread the screws to release the old starter.
4
Install the new recoil starter by aligning it on the engine then replace the screws to secure.
5
With the repair completed reattach the wire and boot to the spark plug and your leaf blower should be ready for use.
Applicable Product Model
Parts Needed
Recoil Starter
$39.41
Total$0.00
Related Articles & Videos
About Us
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
© 2023 RepairClinic.com1‑800‑269‑2609
