Orders placed by 8:00 p.m. ET Monday through Friday will ship the same day.

Danby Dishwasher Power Button Replacement #673000801118

03:36
3.4k
8
This video provides step-by-step repair instructions for replacing the power button on a Danby dishwasher. The most common reason for replacing the button is if it is damaged.

All of the information for this dishwasher power button replacement video is applicable to the following brands:
Danby

Tools needed: Phillip's head screwdriver

Step By Step Instructions

1
Before you replace the power button on your dishwasher be sure to turn off the power to the appliance.
2
Open the dishwasher door and use a phillips-head screwdriver to unthread the mounting screws securing the outer door panel.
3
Slide the door panel down to remove.
4
Next, unthread the screws securing the control panel.
5
Detach the panel and remove the two screws securing the power switch retaining bracket.
6
Slide the bracket up and pull the power switch free of the panel.
7
You can now use a screwdriver to help detach the old power button if still intact.
8
Install the new power button by aligning it on the control panel and snapping it into place.
9
Hold the power button in place and snap the power switch assembly into place in the new button.
10
Replace the screws to secure the retaining bracket.
11
Reposition the control panel on the inner door panel and rethread the screws to secure.
12
Replace the outer door panel by sliding the edges up behind the control panel.
13
Hold the panel in place as you rethread the mounting screws.
14
With the repair completed turn the power supply back on and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the power button on a Danby dishwasher. The most common reason for replacing the button is if it is damaged.

All of the information for this dishwasher power button replacement video is applicable to the following brands:
Danby

Tools needed: Phillip's head screwdriver
Step-By-Step Instructions
1
Before you replace the power button on your dishwasher be sure to turn off the power to the appliance.
2
Open the dishwasher door and use a phillips-head screwdriver to unthread the mounting screws securing the outer door panel.
3
Slide the door panel down to remove.
4
Next, unthread the screws securing the control panel.
5
Detach the panel and remove the two screws securing the power switch retaining bracket.
6
Slide the bracket up and pull the power switch free of the panel.
7
You can now use a screwdriver to help detach the old power button if still intact.
8
Install the new power button by aligning it on the control panel and snapping it into place.
9
Hold the power button in place and snap the power switch assembly into place in the new button.
10
Replace the screws to secure the retaining bracket.
11
Reposition the control panel on the inner door panel and rethread the screws to secure.
12
Replace the outer door panel by sliding the edges up behind the control panel.
13
Hold the panel in place as you rethread the mounting screws.
14
With the repair completed turn the power supply back on and your dishwasher should be ready for use.

Applicable Product Model

Parts Needed
Button
Button
$NaN
Button
Button
$341.83
Total$0.00

Related Articles & Videos

06:38
57k
86
Part Replacement
Danby Dishwasher Heating Element Replacement #674001100030
View Solution
08:37
14k
48
Part Replacement
Danby Dishwasher Water Softener Dispenser #674000700018
View Solution
03:41
5k
22
Part Replacement
Danby Dishwasher Power Switch Replacement #674000300089
View Solution
06:14
8.2k
15
Part Replacement
Danby Dishwasher Temperature Sensor Replacement #674000900038
View Solution