Orders placed by 8:00 p.m. ET Monday through Friday will ship the same day.

Danby Dishwasher Drain Hose Replacement #673000900046

06:25
1.7k
0
This video provides step-by-step repair instructions for replacing the drain hose on a Danby dishwasher. The most common reason for replacing the drain hose is if the dishwasher is leaking or isn't draining properly.

All of the information for this dishwasher drain hose replacement video is applicable to the following brands:
Danby

Tools needed: 5/8" wrench, adjustable wrench, Phillip's head screwdriver

Step By Step Instructions

1
To replace the drain hose in your dishwasher, you will need to uninstall the appliance. To do this, turn off the power to your dishwasher
2
Shut off the water supply valve.
3
Remove the lower access panel by lifting it up from the bottom to detach.
4
Use a 5/8th inch wrench or an adjustable wrench to help unthread the water supply line from the inlet valve elbow fitting be prepared for some water to spill.
5
Next, use a phillips-head screwdriver to unthread the screw securing the junction box cover. Then pull the cover off.
6
Note the location of the wires then untwist the wire nuts to disconnect the wires.
7
Unthread the strain relief nut if applicable and detach the strain relief from the junction box.
8
Next, disconnect the drain hose from the sink drain or garbage disposer and feed it through the cabinet.
9
Open the dishwasher door and remove the mounting bracket screws.
10
To move the dishwasher, you may need to adjust the legs to lower the appliance.
11
Very carefully pull the dishwasher away from the cabinet.
12
To access the drain hose, you will need to detach the insulation blanket from the frame.
13
Break the pinch clamp securing the drain hose to the pump.
14
Cut the zip ties securing the hose to the frame.
15
Detach the hose from the drain pump and you can slide the old hose out.
16
Install the new drain hose by feeding it under the frame.
17
Slide a new clamp onto the end attach the hose to the drain pump and secure it with the clamp.
18
Use new zip ties to secure the hose to the frame.
19
You can secure the insulation blanket to the frame using zip ties as well.
20
Make sure the end of the new drain hose is accessible through the cabinet wall then gently slide the dishwasher back into the cabinet.
21
Adjust the leveling legs if necessary.
22
Replace the screws to secure the mounting brackets to the cabinet or countertop.
23
Feed the drain hose through the cabinet and connect it to the sink drain or disposer.
24
Make sure the hose is elevated above the connection point.
25
Fully position the wire strain relief in the junction box and secure the strain relief nut if applicable.
26
Connect the wires using the wire nuts.
27
Align the cover and replace the screw to secure.
28
Reconnect the water supply line to the inlet valve elbow fitting.
29
Realign the lower access panel and snap it into place.
30
With the repair completed, turn the water supply back on as well as the power and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the drain hose on a Danby dishwasher. The most common reason for replacing the drain hose is if the dishwasher is leaking or isn't draining properly.

All of the information for this dishwasher drain hose replacement video is applicable to the following brands:
Danby

Tools needed: 5/8" wrench, adjustable wrench, Phillip's head screwdriver
Step-By-Step Instructions
1
To replace the drain hose in your dishwasher, you will need to uninstall the appliance. To do this, turn off the power to your dishwasher
2
Shut off the water supply valve.
3
Remove the lower access panel by lifting it up from the bottom to detach.
4
Use a 5/8th inch wrench or an adjustable wrench to help unthread the water supply line from the inlet valve elbow fitting be prepared for some water to spill.
5
Next, use a phillips-head screwdriver to unthread the screw securing the junction box cover. Then pull the cover off.
6
Note the location of the wires then untwist the wire nuts to disconnect the wires.
7
Unthread the strain relief nut if applicable and detach the strain relief from the junction box.
8
Next, disconnect the drain hose from the sink drain or garbage disposer and feed it through the cabinet.
9
Open the dishwasher door and remove the mounting bracket screws.
10
To move the dishwasher, you may need to adjust the legs to lower the appliance.
11
Very carefully pull the dishwasher away from the cabinet.
12
To access the drain hose, you will need to detach the insulation blanket from the frame.
13
Break the pinch clamp securing the drain hose to the pump.
14
Cut the zip ties securing the hose to the frame.
15
Detach the hose from the drain pump and you can slide the old hose out.
16
Install the new drain hose by feeding it under the frame.
17
Slide a new clamp onto the end attach the hose to the drain pump and secure it with the clamp.
18
Use new zip ties to secure the hose to the frame.
19
You can secure the insulation blanket to the frame using zip ties as well.
20
Make sure the end of the new drain hose is accessible through the cabinet wall then gently slide the dishwasher back into the cabinet.
21
Adjust the leveling legs if necessary.
22
Replace the screws to secure the mounting brackets to the cabinet or countertop.
23
Feed the drain hose through the cabinet and connect it to the sink drain or disposer.
24
Make sure the hose is elevated above the connection point.
25
Fully position the wire strain relief in the junction box and secure the strain relief nut if applicable.
26
Connect the wires using the wire nuts.
27
Align the cover and replace the screw to secure.
28
Reconnect the water supply line to the inlet valve elbow fitting.
29
Realign the lower access panel and snap it into place.
30
With the repair completed, turn the water supply back on as well as the power and your dishwasher should be ready for use.

Applicable Product Model

Parts Needed
Recommended Tools and Accessories
Cleaner
Cleaner
$21.94
Total$0.00

Related Articles & Videos

06:38
57k
86
Part Replacement
Danby Dishwasher Heating Element Replacement #674001100030
View Solution
08:37
14k
48
Part Replacement
Danby Dishwasher Water Softener Dispenser #674000700018
View Solution
03:41
5k
22
Part Replacement
Danby Dishwasher Power Switch Replacement #674000300089
View Solution
06:14
8.2k
15
Part Replacement
Danby Dishwasher Temperature Sensor Replacement #674000900038
View Solution