Orders placed by 8:00 p.m. ET Monday through Friday will ship the same day.

Danby Dishwasher Replace Upper Spray Arm Support #673000900195

02:12
371
1
This video provides step-by-step repair instructions for replacing the upper spray arm support on a Danby dishwasher. The most common reason for replacing the support is if the upper spray arm will not spin properly, or if it is leaking.

All of the information for this dishwasher spray arm support replacement video is applicable to the following brands:
Danby

Tools needed: none

Step By Step Instructions

1
To replace the upper wash arm support in your dishwasher we recommend fully removing the upper dish rack.
2
To do this release the retaining tabs to remove the front stop clips from the support rails.
3
Slide out the rack.
4
Next, detach the adapter from the rack.
5
Note where the old support is positioned then remove it.
6
Prepare the new upper wash arm support for installation by transferring the wash arm from the old support to the new one.
7
Position the new support on the rack.
8
Align the adapter on the rack and on the support then snap the adapter into place.
9
Realign the upper rack on the support rails.
10
Replace the front stop clips and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the upper spray arm support on a Danby dishwasher. The most common reason for replacing the support is if the upper spray arm will not spin properly, or if it is leaking.

All of the information for this dishwasher spray arm support replacement video is applicable to the following brands:
Danby

Tools needed: none
Step-By-Step Instructions
1
To replace the upper wash arm support in your dishwasher we recommend fully removing the upper dish rack.
2
To do this release the retaining tabs to remove the front stop clips from the support rails.
3
Slide out the rack.
4
Next, detach the adapter from the rack.
5
Note where the old support is positioned then remove it.
6
Prepare the new upper wash arm support for installation by transferring the wash arm from the old support to the new one.
7
Position the new support on the rack.
8
Align the adapter on the rack and on the support then snap the adapter into place.
9
Realign the upper rack on the support rails.
10
Replace the front stop clips and your dishwasher should be ready for use.

Applicable Product Model

Parts Needed
Total$0.00

Related Articles & Videos

06:38
57k
86
Part Replacement
Danby Dishwasher Heating Element Replacement #674001100030
View Solution
08:37
14k
48
Part Replacement
Danby Dishwasher Water Softener Dispenser #674000700018
View Solution
03:41
5k
22
Part Replacement
Danby Dishwasher Power Switch Replacement #674000300089
View Solution
06:14
8.2k
15
Part Replacement
Danby Dishwasher Temperature Sensor Replacement #674000900038
View Solution