Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more
Danby Dishwasher Lower Spray Arm Axle Connector #673001200003
Skill Level
Total Parts Cost
$0.50Estimated Savings
$112.5001:44
156
0
- Description
This video provides step-by-step repair instructions for replacing the lower spray arm axle connector on a Danby dishwasher. The most common reason for replacing the axle is if the lower spray arm is not spinning properly.
All of the information for this dishwasher axle replacement video is applicable to the following brands:
Danby
Tools needed: Channel Lock pliers
All of the information for this dishwasher axle replacement video is applicable to the following brands:
Danby
Tools needed: Channel Lock pliers
Step By Step Instructions
1
To replace the lower wash arm axle connecter in your dishwasher open the dishwasher door and fully remove the lower dish rack.
2
Rotate the mounting nut clockwise to release the wash arm assembly.
3
You can now use channel-lock pliers to help unthread the old axle connecter.
4
Remove the nut from the old connecter.
5
Prepare the new axle connecter for installation by sliding on the nut.
6
Now thread the new connecter into the base fitting.
7
Position the wash arm assembly on the axle connecter and rotate the nut counter-clockwise to secure.
8
Replace the lower dish rack and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the lower spray arm axle connector on a Danby dishwasher. The most common reason for replacing the axle is if the lower spray arm is not spinning properly.
All of the information for this dishwasher axle replacement video is applicable to the following brands:
Danby
Tools needed: Channel Lock pliers
All of the information for this dishwasher axle replacement video is applicable to the following brands:
Danby
Tools needed: Channel Lock pliers
Step-By-Step Instructions
1
To replace the lower wash arm axle connecter in your dishwasher open the dishwasher door and fully remove the lower dish rack.
2
Rotate the mounting nut clockwise to release the wash arm assembly.
3
You can now use channel-lock pliers to help unthread the old axle connecter.
4
Remove the nut from the old connecter.
5
Prepare the new axle connecter for installation by sliding on the nut.
6
Now thread the new connecter into the base fitting.
7
Position the wash arm assembly on the axle connecter and rotate the nut counter-clockwise to secure.
8
Replace the lower dish rack and your dishwasher should be ready for use.
Applicable Product Model
Parts Needed
Total$0.00
About Us
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
© 2022 RepairClinic.com1‑800‑269‑2609
