1-800-269-2609 24/7
Orders placed by 8:00 p.m. ET Monday through Friday will ship the same day.
Danby Dishwasher Replace Water Supply Tube Nut #673001600021
Skill Level
Total Parts Cost
$10.09Estimated Savings
$112.5001:45
759
2
- Description
This video provides step-by-step repair instructions for replacing the water supply tube nut on a Danby dishwasher. The most common reason for replacing the nut is if the water supply tube is loose or leaking.
All of the information for this dishwasher nut replacement video is applicable to the following brands:
Danby
Tools needed: none
All of the information for this dishwasher nut replacement video is applicable to the following brands:
Danby
Tools needed: none
Step By Step Instructions
1
To replace the water supply tube nut in your dishwasher open the dishwasher door and pull the upper rack forward.
2
Release the retaining tabs to remove the front stop clips from the support rails.
3
Slide out the rack.
4
You can now unthread the old water supply tube nut counter-clockwise to remove.
5
Before you install the new nut make sure the water supply tube is in place then realign the guide and thread the nut clockwise onto the tube.
6
Realign the upper rack on the support rails.
7
Replace the front stop clips and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the water supply tube nut on a Danby dishwasher. The most common reason for replacing the nut is if the water supply tube is loose or leaking.
All of the information for this dishwasher nut replacement video is applicable to the following brands:
Danby
Tools needed: none
All of the information for this dishwasher nut replacement video is applicable to the following brands:
Danby
Tools needed: none
Step-By-Step Instructions
1
To replace the water supply tube nut in your dishwasher open the dishwasher door and pull the upper rack forward.
2
Release the retaining tabs to remove the front stop clips from the support rails.
3
Slide out the rack.
4
You can now unthread the old water supply tube nut counter-clockwise to remove.
5
Before you install the new nut make sure the water supply tube is in place then realign the guide and thread the nut clockwise onto the tube.
6
Realign the upper rack on the support rails.
7
Replace the front stop clips and your dishwasher should be ready for use.
Applicable Product Model
Parts Needed
Nut
$10.09
Total$0.00
Related Articles & Videos
06:14
11k
22
Part Replacement
Danby Dishwasher Temperature Sensor Replacement #674000900038
About Us
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
© 2023 RepairClinic.com1‑800‑269‑2609
