Danby Dishwasher Door Latch Replacement #673001800135

03:26
2.7k
6
This video provides step-by-step repair instructions for replacing the door latch on a Danby dishwasher. The most common reason for replacing the latch is if the door will not stay shut or the dishwasher will not turn on.

All of the information for this dishwasher door latch replacement video is applicable to the following brands:
Danby

Tools needed: Phillips head screwdriver

Step By Step Instructions

1
Before you replace the door latch on your dishwasher be sure to turn off the power to the appliance.
2
Open the dishwasher door and use a phillips-head screwdriver to unthread the mounting screws securing the outer door panel.
3
Slide the door panel down to remove.
4
Next, unthread the screws securing the control panel.
5
Detach the panel and note the location of the door latch wires.
6
Disconnect the wires.
7
Unthread the mounting screws to release the old latch.
8
Install the new door latch by aligning it on the control panel then secure it with the mounting screws.
9
Connect the wires to the appropriate terminals.
10
Reposition the control panel on the inner door panel and rethread the screws to secure.
11
Replace the outer door panel by sliding the edges up behind the control panel.
12
Hold the panel in place as you rethread the mounting screws.
13
With the repair completed turn the power supply back on and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the door latch on a Danby dishwasher. The most common reason for replacing the latch is if the door will not stay shut or the dishwasher will not turn on.

All of the information for this dishwasher door latch replacement video is applicable to the following brands:
Danby

Tools needed: Phillips head screwdriver
Step-By-Step Instructions
1
Before you replace the door latch on your dishwasher be sure to turn off the power to the appliance.
2
Open the dishwasher door and use a phillips-head screwdriver to unthread the mounting screws securing the outer door panel.
3
Slide the door panel down to remove.
4
Next, unthread the screws securing the control panel.
5
Detach the panel and note the location of the door latch wires.
6
Disconnect the wires.
7
Unthread the mounting screws to release the old latch.
8
Install the new door latch by aligning it on the control panel then secure it with the mounting screws.
9
Connect the wires to the appropriate terminals.
10
Reposition the control panel on the inner door panel and rethread the screws to secure.
11
Replace the outer door panel by sliding the edges up behind the control panel.
12
Hold the panel in place as you rethread the mounting screws.
13
With the repair completed turn the power supply back on and your dishwasher should be ready for use.

Applicable Product Model

Parts Needed
Total$0.00

Related Articles & Videos

06:38
66k
106
Part Replacement
Danby Dishwasher Heating Element Replacement #674001100030
08:37
20k
88
Part Replacement
Danby Dishwasher Water Softener Dispenser #674000700018
03:41
6.9k
33
Part Replacement
Danby Dishwasher Power Switch Replacement #674000300089
06:14
11k
22
Part Replacement
Danby Dishwasher Temperature Sensor Replacement #674000900038