1-800-269-2609 24/7
Orders placed by 8:00 p.m. ET Monday through Friday will ship the same day.
Danby Dishwasher Replace Upper Spray Arm Adapter #673001900016
Skill Level
Total Parts Cost
$1.95Estimated Savings
$112.5001:41
550
1
- Description
This video provides step-by-step repair instructions for replacing the upper spray arm adapter on a Danby dishwasher. The most common reason for replacing the adapter is if an insufficient amount of water is reaching the spray arm.
All of the information for this dishwasher adapter replacement video is applicable to the following brands:
Danby
Tools needed: none
All of the information for this dishwasher adapter replacement video is applicable to the following brands:
Danby
Tools needed: none
Step By Step Instructions
1
To replace the upper wash arm adapter in your dishwasher we recommend fully removing the upper dish rack.
2
To do this release the retaining tabs to remove the front stop clips from the support rails.
3
Slide out the rack.
4
You can now detach the old adapter from the rack.
5
Install the new adapter by aligning it on the rack and on the support then snap the adapter into place.
6
Realign the upper rack on the support rails.
7
Replace the front stop clips and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the upper spray arm adapter on a Danby dishwasher. The most common reason for replacing the adapter is if an insufficient amount of water is reaching the spray arm.
All of the information for this dishwasher adapter replacement video is applicable to the following brands:
Danby
Tools needed: none
All of the information for this dishwasher adapter replacement video is applicable to the following brands:
Danby
Tools needed: none
Step-By-Step Instructions
1
To replace the upper wash arm adapter in your dishwasher we recommend fully removing the upper dish rack.
2
To do this release the retaining tabs to remove the front stop clips from the support rails.
3
Slide out the rack.
4
You can now detach the old adapter from the rack.
5
Install the new adapter by aligning it on the rack and on the support then snap the adapter into place.
6
Realign the upper rack on the support rails.
7
Replace the front stop clips and your dishwasher should be ready for use.
Applicable Product Model
Parts Needed
Adapter
$1.95
Total$0.00
Related Articles & Videos
06:14
11k
22
Part Replacement
Danby Dishwasher Temperature Sensor Replacement #674000900038
About Us
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
© 2023 RepairClinic.com1‑800‑269‑2609
