1-800-269-2609 24/7
Orders placed by 8:00 p.m. ET Monday through Friday will ship the same day.
Danby Dishwasher Detergent Dispenser Replacement #674000800047
Skill Level
Total Parts Cost
$24.75Estimated Savings
$112.5003:51
1.5k
6
- Description
This video provides step-by-step repair instructions for replacing the detergent dispenser on a Danby dishwasher. The most common reasons for replacing the dispenser are if it is not properly dispensing detergent, or if it is leaking.
All of the information for this dispenser replacement video is applicable to the following brands:
Danby
Tools needed: Phillip's head screwdriver
All of the information for this dispenser replacement video is applicable to the following brands:
Danby
Tools needed: Phillip's head screwdriver
Step By Step Instructions
1
Before you replace the detergent dispenser in your dishwasher be sure to turn off the power to the appliance.
2
Open the dishwasher door and use a phillips-head screwdriver to unthread the mounting screws securing the outer door panel.
3
Slide the door panel down to remove.
4
Remove the insulation.
5
Depress the tabs to disconnect the wires from the old detergent dispenser.
6
Unthread the screws securing the dispenser brackets.
7
Remove the brackets.
8
Detach the old dispenser from the inner door panel.
9
Install the new detergent dispenser by positioning it in the inner door panel.
10
Reposition the brackets and replace the screws to secure.
11
Connect the wires to the terminals on the new dispenser.
12
Apply some double-sided tape to the dispenser so you can attach the foam insulation.
13
Slide the large Styrofoam insulation into the door frame.
14
Replace the outer door panel by sliding the edges up behind the control panel.
15
Hold the panel in place as you rethread the mounting screws.
16
With the repair completed turn the power supply back on and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the detergent dispenser on a Danby dishwasher. The most common reasons for replacing the dispenser are if it is not properly dispensing detergent, or if it is leaking.
All of the information for this dispenser replacement video is applicable to the following brands:
Danby
Tools needed: Phillip's head screwdriver
All of the information for this dispenser replacement video is applicable to the following brands:
Danby
Tools needed: Phillip's head screwdriver
Step-By-Step Instructions
1
Before you replace the detergent dispenser in your dishwasher be sure to turn off the power to the appliance.
2
Open the dishwasher door and use a phillips-head screwdriver to unthread the mounting screws securing the outer door panel.
3
Slide the door panel down to remove.
4
Remove the insulation.
5
Depress the tabs to disconnect the wires from the old detergent dispenser.
6
Unthread the screws securing the dispenser brackets.
7
Remove the brackets.
8
Detach the old dispenser from the inner door panel.
9
Install the new detergent dispenser by positioning it in the inner door panel.
10
Reposition the brackets and replace the screws to secure.
11
Connect the wires to the terminals on the new dispenser.
12
Apply some double-sided tape to the dispenser so you can attach the foam insulation.
13
Slide the large Styrofoam insulation into the door frame.
14
Replace the outer door panel by sliding the edges up behind the control panel.
15
Hold the panel in place as you rethread the mounting screws.
16
With the repair completed turn the power supply back on and your dishwasher should be ready for use.
Applicable Product Model
Parts Needed
Detergent Dispenser
$24.75
Total$0.00
Related Articles & Videos
06:14
11k
22
Part Replacement
Danby Dishwasher Temperature Sensor Replacement #674000900038
About Us
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
© 2023 RepairClinic.com1‑800‑269‑2609
