Kenmore Dishwasher Replace Dish Rack Support Roller #154333903

loading...

02:31
742
3
This video provides step-by-step instructions for replacing the dish rack support roller on Kenmore dishwashers. The most common reason for replacing the roller is if the dish rack will not move smoothly.

All of the information in this roller replacement video is applicable to the following brands: Kenmore

Tools used: phillips head screwdriver

Step By Step Instructions

1
To replace an upper dish rack support roller use a small flat-head screwdriver to release the retaining tabs on the front dish rack stop clips and remove both clips
2
Slide out the dish rack assembly.
3
Remove the rear stop clip from the appropriate roller support and slide the support out.
4
Use a t-25 torx bit to unthread the screw securing the roller you’re replacing.
5
Use pliers to help detach the washer so you can fully remove the screw.
6
Install the new dish rack support roller by inserting the screw through the roller and sliding on the washer.
7
Now align the roller on the inner liner then thread and tighten the screw to secure.
8
Slide in the support then reposition the rear stop clip and snap it closed.
9
Realign the dish rack on the roller supports and slide it back.
10
Reinstall the front stop clips.
11
Confirm that the rack moves freely and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the dish rack support roller on Kenmore dishwashers. The most common reason for replacing the roller is if the dish rack will not move smoothly.

All of the information in this roller replacement video is applicable to the following brands: Kenmore

Tools used: phillips head screwdriver
Step-By-Step Instructions
1
To replace an upper dish rack support roller use a small flat-head screwdriver to release the retaining tabs on the front dish rack stop clips and remove both clips
2
Slide out the dish rack assembly.
3
Remove the rear stop clip from the appropriate roller support and slide the support out.
4
Use a t-25 torx bit to unthread the screw securing the roller you’re replacing.
5
Use pliers to help detach the washer so you can fully remove the screw.
6
Install the new dish rack support roller by inserting the screw through the roller and sliding on the washer.
7
Now align the roller on the inner liner then thread and tighten the screw to secure.
8
Slide in the support then reposition the rear stop clip and snap it closed.
9
Realign the dish rack on the roller supports and slide it back.
10
Reinstall the front stop clips.
11
Confirm that the rack moves freely and your dishwasher should be ready for use.

Applicable Product Model

Parts Needed
Recommended Tools and Accessories
Screw
Screw
$19.00
Cleaner
Cleaner
$13.45
Total$0.00

Related Articles & Videos