Kenmore Dishwasher Control Board Replacement #154783201

loading...

03:23
10k
20
This video provides step-by-step instructions for replacing the control board on Kenmore dishwashers. The most common reason for replacing the control board is if the dishwasher will not work at all.

All of the information in this board replacement video is applicable to the following brands: Kenmore

Tools used: phillips head screwdriver

Step By Step Instructions

1
Before you replace the dishwasher control board be sure to turn off the power to the appliance.
2
Use a phillips-head screwdriver to unthread the screws securing the control panel assembly to the door.
3
Because the outer door panel is sharp, be careful not to put stress on the wiring.
4
Next, unthread the screws securing the control board cover.
5
Depress the catch to detach the cover.
6
Note the orientation of the wire connecters them disconnect them from the board.
7
Disconnect the ribbon connecter as well.
8
Unthread the screws securing the control board and remove the old board.
9
Install the new control board by positioning it in the control panel then thread and tighten the screws to secure.
10
Connect the ribbon connecter along with the other wire connecters.
11
Align the cover and snap it into place.
12
Replace the screws.
13
Reposition the control panel assembly on the door and secure it with the screws.
14
With the repair completed turn the power back on and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the control board on Kenmore dishwashers. The most common reason for replacing the control board is if the dishwasher will not work at all.

All of the information in this board replacement video is applicable to the following brands: Kenmore

Tools used: phillips head screwdriver
Step-By-Step Instructions
1
Before you replace the dishwasher control board be sure to turn off the power to the appliance.
2
Use a phillips-head screwdriver to unthread the screws securing the control panel assembly to the door.
3
Because the outer door panel is sharp, be careful not to put stress on the wiring.
4
Next, unthread the screws securing the control board cover.
5
Depress the catch to detach the cover.
6
Note the orientation of the wire connecters them disconnect them from the board.
7
Disconnect the ribbon connecter as well.
8
Unthread the screws securing the control board and remove the old board.
9
Install the new control board by positioning it in the control panel then thread and tighten the screws to secure.
10
Connect the ribbon connecter along with the other wire connecters.
11
Align the cover and snap it into place.
12
Replace the screws.
13
Reposition the control panel assembly on the door and secure it with the screws.
14
With the repair completed turn the power back on and your dishwasher should be ready for use.

Applicable Product Model

Parts Needed
Recommended Tools and Accessories
Cleaner
Cleaner
$13.45
Total$0.00

Related Articles & Videos