KitchenAid Dishwasher Water Supply Tube Replacement #WPW10340745

loading...

03:01
1.7k
2
This video provides step-by-step repair instructions for replacing the water supply tube on KitchenAid dishwasher model #KDTE204EPA3. The most common reason for replacing the tube is if the dishwasher is not washing properly or leaking.

All of the information for this water supply tube replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag

Tools needed: none

Step By Step Instructions

1
To replace the water supply tube in your dishwasher, remove the lower dish rack and rotate the wash arm locking nut counter-clockwise to release the arm.
2
Detach the manifold inlet tube from the pump cover.
3
Now lift the manifold up and pull it forward to remove.
4
Pull the upper dish rack out and depress the retaining tabs to fully remove the rack from the rails.
5
Next, pull out the upper tray and flip open the stop clips to fully remove the tray.
6
Release the water supply tube from the retainers on the top and rear of the tub.
7
Detach the old tube from the pump cover to fully remove.
8
Prepare the new water supply tube for installation by transferring the support bracket from the old tube to the new one.
9
Now insert the new supply tube into the pump cover and snap the supply tube into the retainers on the rear and top of the tub.
10
Realign the upper tray on the rails and flip the stop clips closed.
11
Position the upper dish rack on the support rails and snap it into place.
12
Realign the lower manifold on the water supply tube and push down to lock it into place.
13
Insert the inlet tube into the pump cover.
14
Realign the wash arm on the support then rotate the locking nut clockwise to secure.
15
Replace the lower dish rack and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the water supply tube on KitchenAid dishwasher model #KDTE204EPA3. The most common reason for replacing the tube is if the dishwasher is not washing properly or leaking.

All of the information for this water supply tube replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag

Tools needed: none
Step-By-Step Instructions
1
To replace the water supply tube in your dishwasher, remove the lower dish rack and rotate the wash arm locking nut counter-clockwise to release the arm.
2
Detach the manifold inlet tube from the pump cover.
3
Now lift the manifold up and pull it forward to remove.
4
Pull the upper dish rack out and depress the retaining tabs to fully remove the rack from the rails.
5
Next, pull out the upper tray and flip open the stop clips to fully remove the tray.
6
Release the water supply tube from the retainers on the top and rear of the tub.
7
Detach the old tube from the pump cover to fully remove.
8
Prepare the new water supply tube for installation by transferring the support bracket from the old tube to the new one.
9
Now insert the new supply tube into the pump cover and snap the supply tube into the retainers on the rear and top of the tub.
10
Realign the upper tray on the rails and flip the stop clips closed.
11
Position the upper dish rack on the support rails and snap it into place.
12
Realign the lower manifold on the water supply tube and push down to lock it into place.
13
Insert the inlet tube into the pump cover.
14
Realign the wash arm on the support then rotate the locking nut clockwise to secure.
15
Replace the lower dish rack and your dishwasher should be ready for use.

Applicable Product Model

Dishwasher
Brand
Product Type
Model
Subtype
Product Diagram & Manuals
Parts Needed
Recommended Tools and Accessories
Cleaner
Cleaner
$8.99
Cleaner
Cleaner
$13.45
Cleaner
Cleaner
$12.91
Cleaner
Cleaner
$22.12
Total$0.00

Related Articles & Videos