KitchenAid Dishwasher Water Supply Tube Bracket Replacement #W10837623

loading...

01:47
644
3
This video provides step-by-step repair instructions for replacing the water supply tube bracket on KitchenAid dishwasher model #KDTE204EPA3. The most common reason for replacing the bracket is if the water supply tube is not attached properly.

All of the information for this bracket replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag

Tools needed: none

Step By Step Instructions

1
To replace the water supply tube support bracket in your dishwasher, pull the upper dish rack out and depress the retaining tabs to fully remove the rack from the rails.
2
Next, pull out the upper tray and flip open the stop clips to fully remove the tray.
3
If still intact, release the water supply tube from the retainer on the top of the tub and slide off the old support bracket.
4
Install the new support bracket by aligning it on the supply tube then snap it into the retainer on the top of the tub.
5
Realign the upper tray on the rails and flip the stop clips closed.
6
Position the upper dish rack on the support rails and snap it into place.
Description
This video provides step-by-step repair instructions for replacing the water supply tube bracket on KitchenAid dishwasher model #KDTE204EPA3. The most common reason for replacing the bracket is if the water supply tube is not attached properly.

All of the information for this bracket replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag

Tools needed: none
Step-By-Step Instructions
1
To replace the water supply tube support bracket in your dishwasher, pull the upper dish rack out and depress the retaining tabs to fully remove the rack from the rails.
2
Next, pull out the upper tray and flip open the stop clips to fully remove the tray.
3
If still intact, release the water supply tube from the retainer on the top of the tub and slide off the old support bracket.
4
Install the new support bracket by aligning it on the supply tube then snap it into the retainer on the top of the tub.
5
Realign the upper tray on the rails and flip the stop clips closed.
6
Position the upper dish rack on the support rails and snap it into place.

Applicable Product Model

Dishwasher
Brand
Product Type
Model
Subtype
Product Diagram & Manuals
Parts Needed
Bracket
Bracket
$23.24
Recommended Tools and Accessories
Cleaner
Cleaner
$8.99
Cleaner
Cleaner
$13.45
Cleaner
Cleaner
$12.91
Cleaner
Cleaner
$22.12
Total$0.00

Related Articles & Videos