Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more
Toro Lawn Mower Blade Adapter Replacement #108-3766-03
Skill Level
Total Parts Cost
$9.84Estimated Savings
$112.5001:37
10k
5
- Description
This video provides step-by-step instructions for replacing the blade adapter on Toro lawn mowers. The most common reason for replacing the blade adapter is if it is worn or damaged.
All the information in this blade adapter replacement video is applicable to the following brands: Toro, Lawn Boy, Exmark
Tools used: socket wrench
All the information in this blade adapter replacement video is applicable to the following brands: Toro, Lawn Boy, Exmark
Tools used: socket wrench
Step By Step Instructions
1
Before you begin the repair, make sure the mower’s engine has cooled and remove the wire and boot from the spark plug.
2
Your first step is to carefully set the mower on its side.
3
Next, use a support to hold the blade in place.
4
Using a 5/8th inch socket, remove the mounting bolt and washer then pull off the old blade adapter and blade.
5
Install the new blade adapter by first inserting the bolt and washer through the adapter and blade.
6
Position the assembly onto the blade driver and use the support to hold the blade in place.
7
Thread the bolt and torque the bolt to 60 foot pounds. Be aware this may require some effort.
8
Remove the support and carefully set the mower upright.
9
With the repair complete, you can now reattach the spark plug wire and boot.
Description
This video provides step-by-step instructions for replacing the blade adapter on Toro lawn mowers. The most common reason for replacing the blade adapter is if it is worn or damaged.
All the information in this blade adapter replacement video is applicable to the following brands: Toro, Lawn Boy, Exmark
Tools used: socket wrench
All the information in this blade adapter replacement video is applicable to the following brands: Toro, Lawn Boy, Exmark
Tools used: socket wrench
Step-By-Step Instructions
1
Before you begin the repair, make sure the mower’s engine has cooled and remove the wire and boot from the spark plug.
2
Your first step is to carefully set the mower on its side.
3
Next, use a support to hold the blade in place.
4
Using a 5/8th inch socket, remove the mounting bolt and washer then pull off the old blade adapter and blade.
5
Install the new blade adapter by first inserting the bolt and washer through the adapter and blade.
6
Position the assembly onto the blade driver and use the support to hold the blade in place.
7
Thread the bolt and torque the bolt to 60 foot pounds. Be aware this may require some effort.
8
Remove the support and carefully set the mower upright.
9
With the repair complete, you can now reattach the spark plug wire and boot.
Applicable Product Model
Parts Needed
Blade Adapter
$9.84
Total$0.00
About Us
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
© 2022 RepairClinic.com1‑800‑269‑2609
