This video provides step-by-step repair instructions for replacing the wave guide cover on a Kitchenaid microwave (Model #KMBP100ESS01). The most common reason for replacing the cover is if your food is not cooking evenly in the microwave.
All of the information for this microwave cover replacement video is applicable to the following brands:
Tools used: multi-screwdriver
Microwave Oven -Model KMBP100ESS01
KitchenAid Built-In Microwave Oven Wave Guide Cover Replacement
ATTENTION: TOOLS & ASSISTANCE NEEDED:
Step 1: You will need a T-15 Torx bit and a razor blade.
Step 2: Remove any racks from the oven along with the turntable and support.
"Step 3: Using a T-15 Torx bit, unthread the screws securing the cover you're replacing. "
Step 4: Use a razor blade to help detach the old cover.
"Step 5: Before you install the new wave guide cover, clean off any residue from the outlet. "
Step 6: Apply a thin layer of silicone around the outlet.
"Step 7: Align the new cover, then thread the screws to secure. "
"Step 8: With the cover installed, replace the support and align the turntable on the coupling. "
Congrats! Your microwave oven is ready for use.