Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Honda Lawn Mower High-Lift Blade Replacement #72511-VE1-020

01:38
23k
25
This video provides step-by-step instructions for replacing the high-lift blade on Honda lawn mowers. The most common reason to replace the blade is to sharpen it when it is dull, causing grass to be torn rather than cut cleanly.

All of the information in this blade replacement video is applicable to the following brands: Honda

Tools used: socket wrench

Step By Step Instructions

1
Before you begin the repair, make sure the mower’s engine has cooled remove the wire and boot from the spark plug. and turn the fuel valve off.
2
Now carefully set the mower on its side.
3
Use a support to secure the blade.
4
Use a 14 millimeter socket to remove the bolts and washers and pull the old blade or blades off.
5
Install the new high-lift blade by aligning it with the mulching blade if applicable then position the blade or blades on the roto-stop and secure the bolts and washers.
6
Torque the bolts to manufacturer specifications.
7
Remove the support and carefully set the mower upright.
8
Turn the fuel valve back on and reattach the spark plug wire and boot.
Description
This video provides step-by-step instructions for replacing the high-lift blade on Honda lawn mowers. The most common reason to replace the blade is to sharpen it when it is dull, causing grass to be torn rather than cut cleanly.

All of the information in this blade replacement video is applicable to the following brands: Honda

Tools used: socket wrench
Step-By-Step Instructions
1
Before you begin the repair, make sure the mower’s engine has cooled remove the wire and boot from the spark plug. and turn the fuel valve off.
2
Now carefully set the mower on its side.
3
Use a support to secure the blade.
4
Use a 14 millimeter socket to remove the bolts and washers and pull the old blade or blades off.
5
Install the new high-lift blade by aligning it with the mulching blade if applicable then position the blade or blades on the roto-stop and secure the bolts and washers.
6
Torque the bolts to manufacturer specifications.
7
Remove the support and carefully set the mower upright.
8
Turn the fuel valve back on and reattach the spark plug wire and boot.

Applicable Product Model

Lawn Mower
Brand
Product Type
Model
Subtype
Product Diagram & Manuals
Parts Needed
Total$0.00

Related Articles & Videos