Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Honda Small Engine Spark Plug Replacement #7131

01:18
25k
32
This video provides step-by-step repair instructions for replacing the spark plug on a Honda small engine (which is commonly found in lawn mowers, riding tractors, zero-turn radius mowers, wheeled edgers, pressure washers, and generators). The most common reasons for replacing the spark plug are when the engine won’t start, is hard to start, stops after a few seconds, or runs poorly.

All of the information for this spark plug replacement video is applicable to the following brands:
Honda, Toro, Lawn Boy, MTD, Ariens, Cub Cadet, Kawasaki

Tools needed: socketspark plug wrench

Step By Step Instructions

1
Before you begin the replacement, make sure the engine has cooled.
2
Now remove the wire and boot from the spark plug.
3
Use a socket or a spark plug wrench to loosen and remove the old spark plug.
4
Install the new spark plug by threading it into the cylinder head and secure with the socket or wrench.
5
Be careful not to over-tighten or damage the plug itself.
6
Once secured, attach the spark plug wire and boot.
Description
This video provides step-by-step repair instructions for replacing the spark plug on a Honda small engine (which is commonly found in lawn mowers, riding tractors, zero-turn radius mowers, wheeled edgers, pressure washers, and generators). The most common reasons for replacing the spark plug are when the engine won’t start, is hard to start, stops after a few seconds, or runs poorly.

All of the information for this spark plug replacement video is applicable to the following brands:
Honda, Toro, Lawn Boy, MTD, Ariens, Cub Cadet, Kawasaki

Tools needed: socketspark plug wrench
Step-By-Step Instructions
1
Before you begin the replacement, make sure the engine has cooled.
2
Now remove the wire and boot from the spark plug.
3
Use a socket or a spark plug wrench to loosen and remove the old spark plug.
4
Install the new spark plug by threading it into the cylinder head and secure with the socket or wrench.
5
Be careful not to over-tighten or damage the plug itself.
6
Once secured, attach the spark plug wire and boot.

Applicable Product Model

Parts Needed
Recommended Tools and Accessories
Total$0.00

Related Articles & Videos