Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Toro Snowblower Spark Plug Replacement #119-1961

01:28
26k
34
This video provides step-by-step repair instructions for replacing the spark plug on a Toro snowblower. The most common reasons for replacing the spark plug are when the snowblower stops after a few seconds, runs poorly, or won’t start.

All of the information for this spark plug replacement video is applicable to the following brands:
Toro

Tools needed: socket/spark plug wrench

Step By Step Instructions

1
Before you begin the spark plug replacement, make sure the engine has cooled and remove the snowblower’s start key from the ignition.
2
Your first step is to remove the wire and boot from the spark plug.
3
Use a socket or a spark plug wrench to loosen and remove the old spark plug.
4
Install the new spark plug by threading it into the cylinder head
5
Secure it with the socket or spark plug wrench.
6
Be careful not to over-tighten or damage the plug itself.
7
Once secured, attach the spark plug wire and boot.
8
With the new spark plug installed you can now return the start key to the ignition.
Description
This video provides step-by-step repair instructions for replacing the spark plug on a Toro snowblower. The most common reasons for replacing the spark plug are when the snowblower stops after a few seconds, runs poorly, or won’t start.

All of the information for this spark plug replacement video is applicable to the following brands:
Toro

Tools needed: socket/spark plug wrench
Step-By-Step Instructions
1
Before you begin the spark plug replacement, make sure the engine has cooled and remove the snowblower’s start key from the ignition.
2
Your first step is to remove the wire and boot from the spark plug.
3
Use a socket or a spark plug wrench to loosen and remove the old spark plug.
4
Install the new spark plug by threading it into the cylinder head
5
Secure it with the socket or spark plug wrench.
6
Be careful not to over-tighten or damage the plug itself.
7
Once secured, attach the spark plug wire and boot.
8
With the new spark plug installed you can now return the start key to the ignition.

Applicable Product Model

Parts Needed
Total$0.00

Related Articles & Videos