Troy-Bilt Snowblower Scraper Blade Replacement #731-08171

loading...

01:12
17k
11
This video provides step-by-step repair instructions for replacing the scraper blade on a Troy-Bilt snowblower. The most common reason for replacing the scraper blade is when it is worn-out.

All of the information for this scraper blade replacement video is applicable to the following brands:
MTD, Craftsman, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Huskee

Tools needed: socket wrench

Step By Step Instructions

1
Before beginning this procedure, be sure to remove the snowblower’s start key from the ignition.
2
To replace the scraper blade, your first step is to tip the snowblower back so it rests on its handle.
3
Note the orientation of the blade and remove the four nuts from the bolts holding the blade in place.
4
Pull the old blade off of the bolts and discard.
5
Install the new scraper blade by sliding it onto the bolts and aligning it with the auger housing.
6
Secure the blade with the nuts.
7
With the new blade in place, you can now tip the snowblower back to its upright position and return the start key to the ignition.
Description
This video provides step-by-step repair instructions for replacing the scraper blade on a Troy-Bilt snowblower. The most common reason for replacing the scraper blade is when it is worn-out.

All of the information for this scraper blade replacement video is applicable to the following brands:
MTD, Craftsman, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Huskee

Tools needed: socket wrench
Step-By-Step Instructions
1
Before beginning this procedure, be sure to remove the snowblower’s start key from the ignition.
2
To replace the scraper blade, your first step is to tip the snowblower back so it rests on its handle.
3
Note the orientation of the blade and remove the four nuts from the bolts holding the blade in place.
4
Pull the old blade off of the bolts and discard.
5
Install the new scraper blade by sliding it onto the bolts and aligning it with the auger housing.
6
Secure the blade with the nuts.
7
With the new blade in place, you can now tip the snowblower back to its upright position and return the start key to the ignition.

Applicable Product Model

Parts Needed
Total$0.00

Related Articles & Videos