Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Troy-Bilt Snowblower Fuel Line Replacement #951-12613

01:28
14k
14
This video provides step-by-step repair instructions for replacing the fuel line on a Troy-Bilt snowblower. The most common reason for replacing the fuel line is when the snowblower is leaking gas.

All of the information for this fuel line replacement video is applicable to the following brands:
MTD, Yard Machines, Craftsman, Cub Cadet, Troy-Bilt, Huskee, Yard-Man

Tools needed: pliers

Step By Step Instructions

1
Perform the procedure with little or no gasoline in the tank and be sure to remove the snowblower’s start key from the ignition.
2
Your first step is to release the clamp securing the fuel line to the carburetor and pull the fuel line off. This may require some effort.
3
Next, release the clamp securing the opposite end of the fuel line to the gas tank.
4
Pull the fuel line off and set it aside.
5
Install the new fuel line by first transferring the clamps from the old part to the new one.
6
Now slide the new fuel line over the tank port and secure it with the clamp.
7
Attach the opposite end of the fuel line to the carburetor and secure the clamp.
8
With the new fuel line installed you can now return the start key to the ignition.
Description
This video provides step-by-step repair instructions for replacing the fuel line on a Troy-Bilt snowblower. The most common reason for replacing the fuel line is when the snowblower is leaking gas.

All of the information for this fuel line replacement video is applicable to the following brands:
MTD, Yard Machines, Craftsman, Cub Cadet, Troy-Bilt, Huskee, Yard-Man

Tools needed: pliers
Step-By-Step Instructions
1
Perform the procedure with little or no gasoline in the tank and be sure to remove the snowblower’s start key from the ignition.
2
Your first step is to release the clamp securing the fuel line to the carburetor and pull the fuel line off. This may require some effort.
3
Next, release the clamp securing the opposite end of the fuel line to the gas tank.
4
Pull the fuel line off and set it aside.
5
Install the new fuel line by first transferring the clamps from the old part to the new one.
6
Now slide the new fuel line over the tank port and secure it with the clamp.
7
Attach the opposite end of the fuel line to the carburetor and secure the clamp.
8
With the new fuel line installed you can now return the start key to the ignition.

Applicable Product Model

Parts Needed
Fuel Line
Fuel Line
$12.86
Total$0.00

Related Articles & Videos