1-800-269-2609 24/7
Price Match Guarantee
Order by 9:00 p.m. ET, and we'll ship the same day
365-Day Return Policy
Price Match GuaranteeFrigidaire Dishwasher Drain Hose Replacement (part 807117001)
Skill Level
Total Parts Cost
$38.73Estimated Savings
$112.5006:05
- Description
This video provides step-by-step repair instructions for replacing the drain hose on Frigidaire dishwasher model #FGID2466QF7A. The most common reason for replacing the drain hose is if the dishwasher is leaking water.
All of the information for this drain hose replacement video is applicable to the following brands: Frigidaire & Electrolux
Tools needed: Quarter-inch socket, Phillips-head screwdriver, Channel-lock pliers, T-20 Torx bit, & a flathead screwdriver.
All of the information for this drain hose replacement video is applicable to the following brands: Frigidaire & Electrolux
Tools needed: Quarter-inch socket, Phillips-head screwdriver, Channel-lock pliers, T-20 Torx bit, & a flathead screwdriver.
Step By Step Instructions
1
Frigidaire Dishwasher - Model FGID2466QF7A
2
Frigidaire Dishwasher - Model FGID2466QF7A
3
Dishwasher Drain Hose Replacement
4
Tools Needed
5
"You will need a quarter-inch socket or a phillips-head screwdriver, channel-lock pliers, a quarter-inch socket or a T-20 Torx bit for this procedure."
6
"To replace the dishwasher drain hose, you will need to fully uninstall the appliance."
7
Be sure to turn off the power to the appliance.
8
Shut off the water supply valve.
9
"Using a quarter-inch socket or a phillips-head screwdriver, unthread the two mounting screws securing the lower access panels."
10
Set the panels aside.
11
Use channel-lock pliers to unthread the water supply line elbow fitting from the inlet valve - be prepared for some water to spill.
12
Use a quarter-inch socket or a T-20 Torx bit to unthread the screw to release the junction box cover.
13
"Note the orientation of the power wires, then untwist the wire nuts to disconnect the wires."
14
Unthread the screw to release the grounding wire.
15
Unthread the strain relief nut and detach the strain relief and power wires from the junction box.
16
"If still intact, disconnect the old drain hose from the sink drain or garbage disposer and feed it through the cabinet."
17
"Unthread the mounting screws securing the dishwasher to the countertop, cabinet, or floor."
18
"To move the dishwasher, you may need to adjust the legs to lower the appliance."
19
Gently pull the dishwasher away from the cabinet.
20
Loosen the screw clamp securing the drain hose to the sump assembly.
21
Pull the old hose free and slide off the clamp.
22
Prepare the new drain hose for installation by sliding the screw clamp over the larger end.
23
Attach that end to the sump port and tighten the clamp.
24
"Feed the opposite end of the hose through the hole in the cabinet wall, then gently slide the dishwasher back into the cabinet."
25
Adjust the leveling legs if necessary.
26
"Rethread the screws to secure the appliance to the countertop, cabinet, or floor."
27
"Connect the new drain hose to the sink drain or disposer – be aware, you may need to cut the end of the hose where indicated to secure it to the drain fitting."
28
Make sure the hose is elevated above the connection point.
29
Fully position the wires and strain relief in the junction box then thread and tighten the strain relief nut.
30
Secure the grounding wire with the screw.
31
Join the black wires together and the white wires together and secure them with the wire nuts.
32
"With the wires positioned inside the junction box, realign the cover and rethread the screw to secure."
33
Reconnect the water supply line fitting to the inlet valve.
34
"Realign the two access panels, then thread the screws to secure."
35
Turn the water supply back on as well as the power.
36
Congrats! Your dishwasher is ready for use.
Description
This video provides step-by-step repair instructions for replacing the drain hose on Frigidaire dishwasher model #FGID2466QF7A. The most common reason for replacing the drain hose is if the dishwasher is leaking water.
All of the information for this drain hose replacement video is applicable to the following brands: Frigidaire & Electrolux
Tools needed: Quarter-inch socket, Phillips-head screwdriver, Channel-lock pliers, T-20 Torx bit, & a flathead screwdriver.
All of the information for this drain hose replacement video is applicable to the following brands: Frigidaire & Electrolux
Tools needed: Quarter-inch socket, Phillips-head screwdriver, Channel-lock pliers, T-20 Torx bit, & a flathead screwdriver.
Step-By-Step Instructions
1
Frigidaire Dishwasher - Model FGID2466QF7A
2
Frigidaire Dishwasher - Model FGID2466QF7A
3
Dishwasher Drain Hose Replacement
4
Tools Needed
5
"You will need a quarter-inch socket or a phillips-head screwdriver, channel-lock pliers, a quarter-inch socket or a T-20 Torx bit for this procedure."
6
"To replace the dishwasher drain hose, you will need to fully uninstall the appliance."
7
Be sure to turn off the power to the appliance.
8
Shut off the water supply valve.
9
"Using a quarter-inch socket or a phillips-head screwdriver, unthread the two mounting screws securing the lower access panels."
10
Set the panels aside.
11
Use channel-lock pliers to unthread the water supply line elbow fitting from the inlet valve - be prepared for some water to spill.
12
Use a quarter-inch socket or a T-20 Torx bit to unthread the screw to release the junction box cover.
13
"Note the orientation of the power wires, then untwist the wire nuts to disconnect the wires."
14
Unthread the screw to release the grounding wire.
15
Unthread the strain relief nut and detach the strain relief and power wires from the junction box.
16
"If still intact, disconnect the old drain hose from the sink drain or garbage disposer and feed it through the cabinet."
17
"Unthread the mounting screws securing the dishwasher to the countertop, cabinet, or floor."
18
"To move the dishwasher, you may need to adjust the legs to lower the appliance."
19
Gently pull the dishwasher away from the cabinet.
20
Loosen the screw clamp securing the drain hose to the sump assembly.
21
Pull the old hose free and slide off the clamp.
22
Prepare the new drain hose for installation by sliding the screw clamp over the larger end.
23
Attach that end to the sump port and tighten the clamp.
24
"Feed the opposite end of the hose through the hole in the cabinet wall, then gently slide the dishwasher back into the cabinet."
25
Adjust the leveling legs if necessary.
26
"Rethread the screws to secure the appliance to the countertop, cabinet, or floor."
27
"Connect the new drain hose to the sink drain or disposer – be aware, you may need to cut the end of the hose where indicated to secure it to the drain fitting."
28
Make sure the hose is elevated above the connection point.
29
Fully position the wires and strain relief in the junction box then thread and tighten the strain relief nut.
30
Secure the grounding wire with the screw.
31
Join the black wires together and the white wires together and secure them with the wire nuts.
32
"With the wires positioned inside the junction box, realign the cover and rethread the screw to secure."
33
Reconnect the water supply line fitting to the inlet valve.
34
"Realign the two access panels, then thread the screws to secure."
35
Turn the water supply back on as well as the power.
36
Congrats! Your dishwasher is ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
Read More
© 2023 RepairClinic.com1‑800‑269‑2609
