Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Echo Leaf Blower Fuel Tank Replacement (A350002530)

loading...

02:33
397
5
This video provides step-by-step instructions for replacing the fuel tank on Echo leaf blowers.

Step By Step Instructions

1
Leaf Blower- Model PB580T
2
Leaf Blower Fuel Tank Installation
3
"Step 1: Make sure the engine has cooled and the on/off switch is in the ""off"" position."
4
Step 2: Perform this procedure with no fuel in the tank.
5
Step 3: Use a large flat-head screwdriver to help pry the grommet feee of the tank to release the fuel system assembly.
6
Step 4: Unthread the fuel tank cap and pull the retainer free of the tank.
7
Step 5: Set the leaf blower on its side.
8
"Step 6: Use a T-27 Torx bit to unthread the four screws securing the fuel tank retainer. "
9
Step 7: Detach the retainer and remove the old fuel tank.
10
"Step 8: Install the new fuel tank by first aligning the retainer then position the retainer on the frame. "
11
Step 9: Confirm the washers are in place on the screws then thread the four screws to secure the retainer.
12
Step 10: Insert the fuel cap retainer into the new tank then thread on the cap.
13
Step 11: Fill the new tank with fuel.
14
Congratulations! Your leaf blower should be ready for use.
Description
This video provides step-by-step instructions for replacing the fuel tank on Echo leaf blowers.
Step-By-Step Instructions
1
Leaf Blower- Model PB580T
2
Leaf Blower Fuel Tank Installation
3
"Step 1: Make sure the engine has cooled and the on/off switch is in the ""off"" position."
4
Step 2: Perform this procedure with no fuel in the tank.
5
Step 3: Use a large flat-head screwdriver to help pry the grommet feee of the tank to release the fuel system assembly.
6
Step 4: Unthread the fuel tank cap and pull the retainer free of the tank.
7
Step 5: Set the leaf blower on its side.
8
"Step 6: Use a T-27 Torx bit to unthread the four screws securing the fuel tank retainer. "
9
Step 7: Detach the retainer and remove the old fuel tank.
10
"Step 8: Install the new fuel tank by first aligning the retainer then position the retainer on the frame. "
11
Step 9: Confirm the washers are in place on the screws then thread the four screws to secure the retainer.
12
Step 10: Insert the fuel cap retainer into the new tank then thread on the cap.
13
Step 11: Fill the new tank with fuel.
14
Congratulations! Your leaf blower should be ready for use.

Applicable Product Model

Parts Needed
Fuel Tank
Fuel Tank
$19.96
Total$0.00

Related Articles & Videos