DescriptionThis video provides step-by-step instructions for replacing the muffler cover on Homelite leaf blowers.
All of the information in this muffler cover replacement video is applicable to the following brands: Ryobi & Homelite.
Tools used: T-25 Torx bit.
Step-By-Step Instructions1
Homelite Hand-Held Leaf Blower - Model UT09526
2
Leaf Blower Muffler Cover Replacement
4
You will need a T-20 Torx bit and a T-25 Torx bit for this procedure.
5
Make sure the engine has cooled.
6
Remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
7
"Using a T-20 Torx bit, unthread the three mounting screws to release the engine cover."
8
Use a T-25 Torx bit to unthread the two screws securing the muffler assembly.
10
Install the new muffler cover by positioning it on the muffler.
11
Insert the exhaust tube into the blower housing as you realign the assembly on the engine block.
13
Realign the engine cover and secure it with the screws.
14
Reattach the wire and boot to the spark plug.
15
Congrats! Your leaf blower is ready for use.