Toro Snowblower Scraper Blade Replacement 139-3536

02:25
8.6k
30
This video provides step-by-step repair instructions for replacing the scraper blade on a Toro snowblower.

All of the information for this video is applicable to the following brands:
Toro

Step By Step Instructions

1
Toro Snowblower - Model 38752
2
Snowblower Scraper Blade Replacement
3
Tools & Assistance Needed
4
"You will need pliers, a 13mm wrench and a 14mm socket for this procedure, and you may need assistance."
5
Be sure there is little or no fuel in the tank.
6
Tip the snowblower forward so its rests on the auger housing.
7
Use pliers to detach the two scraper blade springs.
8
Use a 13mm wrench and a 14mm socket to remove the nuts and bolts securing the old scraper blade.
9
Prepare the new scraper blade for installation by transferring the bushings from the old blade to the new one.
10
"Align the new scraper blade on the frame, then insert the bolts and thread on the nuts."
11
Reinstall the springs.
12
"Return the snowblower to its upright position, then refill the fuel tank if necessary."
13
Congrats! Your snowblower is ready for use.
Description
This video provides step-by-step repair instructions for replacing the scraper blade on a Toro snowblower.

All of the information for this video is applicable to the following brands:
Toro
Step-By-Step Instructions
1
Toro Snowblower - Model 38752
2
Snowblower Scraper Blade Replacement
3
Tools & Assistance Needed
4
"You will need pliers, a 13mm wrench and a 14mm socket for this procedure, and you may need assistance."
5
Be sure there is little or no fuel in the tank.
6
Tip the snowblower forward so its rests on the auger housing.
7
Use pliers to detach the two scraper blade springs.
8
Use a 13mm wrench and a 14mm socket to remove the nuts and bolts securing the old scraper blade.
9
Prepare the new scraper blade for installation by transferring the bushings from the old blade to the new one.
10
"Align the new scraper blade on the frame, then insert the bolts and thread on the nuts."
11
Reinstall the springs.
12
"Return the snowblower to its upright position, then refill the fuel tank if necessary."
13
Congrats! Your snowblower is ready for use.

Applicable Product Model

Snowblower
Brand
Product Type
Model
Subtype
Product Diagram & Manuals
Parts Needed
Total$0.00

Related Articles & Videos

04:12
24k
113
Part Replacement
Toro Snowblower Clutch Cable Replacement 140-1000
05:33
30k
58
Part Replacement
Toro Snowblower Carburetor Replacement 127-9111
09:30
9.2k
22
Part Replacement
Toro Snowblower Ignition Coil Replacement 136-7769
04:07
11k
17
Part Replacement
Toro Snowblower Recoil Starter Replacement 127-9402