This video provides step-by-step repair instructions for replacing the idler arm spring clip on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro Snowblower - Model 38752
Snowblower Idler Arm Spring Clip Replacement
You will need a 3/8th inch socket and pliers for this procedure.
Use a 3/8th inch socket or nut driver to unthread the three mounting screws to release the belt cover.
Use pliers to detach the idler arm spring and remove the old clip.
"Install the new idler arm spring clip by positioning it in the frame, then attach the spring to the clip and the idler arm."
Replace the belt cover and secure it with the screws.
Congrats! Your snowblower is ready for use.