This video provides step-by-step repair instructions for replacing the clutch cable adjuster on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro Snowblower - Model 38752
Snowblower Clutch Cable Adjuster Replacement
Lift the clutch cable sleeve and unhook the adjuster from the bail arm spring.
"Note which cable adjuster hole the cable is inserted into, then detach the cable from the old adjuster."
Install the new clutch cable adjuster by feeding the z-end of the clutch cable through the slot in the bottom of the aduster then insert the z-end into the appropriate hole.
Attach the adjuster to the bail arm spring.
Congrats! Your snowblower is ready for use.