Toro Snowblower Muffler Assembly Replacement 133-9846

03:41
702
1
This video provides step-by-step repair instructions for replacing the muffler assembly on a Toro snowblower.

All of the information for this video is applicable to the following brands:
Toro

Step By Step Instructions

1
Toro Snowblower - Model 38752
2
Snowblower Muffler Assembly Replacement
3
Tools Needed
4
"You will need an 8mm socket, a 8mm wrench, a 3/8th inch socket and a half-inch socket for this procedure."
5
Make sure the engine and existing muffler have cooled.
6
Use an 8mm socket to unthread five of the six bolts securing the muffler cover.
7
Use a 8mm wrench to unthread the sixth bolt.
8
Use a 3/8th inch socket or nut driver to unthread the mounting bolt securing the housing to the rear bracket.
9
Unthread the screws to release the two retaining clamps holding the housing to the handle.
10
Use a half-inch socket to fully unthread the upper bolts securing the handle assembly.
11
Lower the handle to fully remove the muffler cover.
12
Use the half-inch socket to unthread the mounting nuts securing the muffler assembly.
13
Slide off the old assembly.
14
Remove the exhaust gasket.
15
"To install the new muffler assembly, first place the existing gasket or a new one on the mounting bolts, then position the new assembly."
16
Thread the nuts to secure.
17
Reposition the muffler cover and thread the six bolts to secure; reposition the handle assembly and rethread the upper bolts.
18
Align the two retaining clamps and thread the screws to secure the housing to the handle.
19
Rethread the mounting bolt to secure the housing to the rear bracket.
20
Congrats! Your snowblower is ready for use.
Description
This video provides step-by-step repair instructions for replacing the muffler assembly on a Toro snowblower.

All of the information for this video is applicable to the following brands:
Toro
Step-By-Step Instructions
1
Toro Snowblower - Model 38752
2
Snowblower Muffler Assembly Replacement
3
Tools Needed
4
"You will need an 8mm socket, a 8mm wrench, a 3/8th inch socket and a half-inch socket for this procedure."
5
Make sure the engine and existing muffler have cooled.
6
Use an 8mm socket to unthread five of the six bolts securing the muffler cover.
7
Use a 8mm wrench to unthread the sixth bolt.
8
Use a 3/8th inch socket or nut driver to unthread the mounting bolt securing the housing to the rear bracket.
9
Unthread the screws to release the two retaining clamps holding the housing to the handle.
10
Use a half-inch socket to fully unthread the upper bolts securing the handle assembly.
11
Lower the handle to fully remove the muffler cover.
12
Use the half-inch socket to unthread the mounting nuts securing the muffler assembly.
13
Slide off the old assembly.
14
Remove the exhaust gasket.
15
"To install the new muffler assembly, first place the existing gasket or a new one on the mounting bolts, then position the new assembly."
16
Thread the nuts to secure.
17
Reposition the muffler cover and thread the six bolts to secure; reposition the handle assembly and rethread the upper bolts.
18
Align the two retaining clamps and thread the screws to secure the housing to the handle.
19
Rethread the mounting bolt to secure the housing to the rear bracket.
20
Congrats! Your snowblower is ready for use.

Applicable Product Model

Snowblower
Brand
Product Type
Model
Subtype
Product Diagram & Manuals
Parts Needed
Muffler
Muffler
$32.14
Total$0.00

Related Articles & Videos

04:12
9.9k
46
Part Replacement
Toro Snowblower Clutch Cable Replacement 140-1000
05:33
6.8k
8
Part Replacement
Toro Snowblower Carburetor Replacement 127-9111
04:07
3.2k
9
Part Replacement
Toro Snowblower Recoil Starter Replacement 127-9402
02:25
2.7k
7
Part Replacement
Toro Snowblower Scraper Blade Replacement 139-3536