Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Frigidaire Gas Range Top Oven Door Trim Replacement (316491201)

03:04
226
1
This video provides step-by-step instructions for replacing the top oven door trim on Frigidaire gas ranges.

All of the information in this video is applicable to the following brands: Frigidaire

Tools used: Phillips-head screwdriver.

Step By Step Instructions

1
Frigidaire Gas Range - Model FFGF3052TSA
2
Gas Range Top Oven Door Trim Replacement
3
Tools & Assistance Needed
4
"You will need a towel or blanket and a phillips-head screwdriver for this procedure, and you may need assistance."
5
Be sure to unplug the power cord or shut off the power supply.
6
Fully open the oven door and rotate both door hinge locks back.
7
"Partially close the door, then lift and pull the door toward you to remove."
8
Set the door handle-side down on a towel or blanket.
9
"Using a phillips-head screwdriver, unthread the four bottom screws securing the outer door panel."
10
Unthread the two upper screws securing the door handle and the inner panel assembly.
11
Set the handle aside.
12
Separate the inner door assembly from the outer panel.
13
Slide off the old door trim.
14
Install the new top oven door trim by sliding it onto the outer door panel.
15
Join the inner door assembly and the outer door panel together.
16
"Realign the handle and fully thread the upper screws to secure it, then replace the four bottom screws."
17
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
18
"Lower the door to its fully open position, then rotate the hinge locks forward."
19
Plug the power cord back in or restore the power supply.
20
Congrats! Your gas range is ready for use.
Description
This video provides step-by-step instructions for replacing the top oven door trim on Frigidaire gas ranges.

All of the information in this video is applicable to the following brands: Frigidaire

Tools used: Phillips-head screwdriver.
Step-By-Step Instructions
1
Frigidaire Gas Range - Model FFGF3052TSA
2
Gas Range Top Oven Door Trim Replacement
3
Tools & Assistance Needed
4
"You will need a towel or blanket and a phillips-head screwdriver for this procedure, and you may need assistance."
5
Be sure to unplug the power cord or shut off the power supply.
6
Fully open the oven door and rotate both door hinge locks back.
7
"Partially close the door, then lift and pull the door toward you to remove."
8
Set the door handle-side down on a towel or blanket.
9
"Using a phillips-head screwdriver, unthread the four bottom screws securing the outer door panel."
10
Unthread the two upper screws securing the door handle and the inner panel assembly.
11
Set the handle aside.
12
Separate the inner door assembly from the outer panel.
13
Slide off the old door trim.
14
Install the new top oven door trim by sliding it onto the outer door panel.
15
Join the inner door assembly and the outer door panel together.
16
"Realign the handle and fully thread the upper screws to secure it, then replace the four bottom screws."
17
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
18
"Lower the door to its fully open position, then rotate the hinge locks forward."
19
Plug the power cord back in or restore the power supply.
20
Congrats! Your gas range is ready for use.

Applicable Product Model

Range/Stove/Oven
Model
Subtype
Gas
Product Diagram & Manuals
Parts Needed
Total$0.00

Related Articles & Videos