Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Frigidaire Gas Range Left Front Burner Orifice Replacement (316527500)

02:01
173
1
This video provides step-by-step instructions for replacing the left front burner orifice on Frigidaire gas ranges.

All of the information in this video is applicable to the following brands: Frigidaire

Tools used: 3/16th-inch socket or nut driver, & a 7mm socket or nut driver.

Step By Step Instructions

1
Frigidaire Gas Range - Model FFGF3052TSA
2
Gas Range Left Front Burner Orifice Replacement
3
Tools Needed
4
"You will need a 3/16th-inch socket or nut driver, a piece of tape, and a 7mm socket for this procedure."
5
Be sure to unplug the power cord or shut off the power supply.
6
Shut off the gas supply as well.
7
Lift off the left-side grate.
8
Remove the burner cap and use a 3/16th-inch socket or nut driver to unthread the two mounting screws securing the base.
9
Lift the base straight up to remove.
10
"To help grip the orifice, place a piece of tape in a 7mm socket or nut driver."
11
Unthread the old orifice from the holder.
12
"Install the new orifice by inserting it into the socket or nut driver, then thread it into the holder."
13
Reposition the burner base so the igniter aligns with the notch in the base.
14
Thread the two mounting screws.
15
Realign the burner cap and grate.
16
Turn the gas supply back on.
17
Plug the power cord back in or restore the power supply.
18
Congrats! Your gas range is ready for use.
Description
This video provides step-by-step instructions for replacing the left front burner orifice on Frigidaire gas ranges.

All of the information in this video is applicable to the following brands: Frigidaire

Tools used: 3/16th-inch socket or nut driver, & a 7mm socket or nut driver.
Step-By-Step Instructions
1
Frigidaire Gas Range - Model FFGF3052TSA
2
Gas Range Left Front Burner Orifice Replacement
3
Tools Needed
4
"You will need a 3/16th-inch socket or nut driver, a piece of tape, and a 7mm socket for this procedure."
5
Be sure to unplug the power cord or shut off the power supply.
6
Shut off the gas supply as well.
7
Lift off the left-side grate.
8
Remove the burner cap and use a 3/16th-inch socket or nut driver to unthread the two mounting screws securing the base.
9
Lift the base straight up to remove.
10
"To help grip the orifice, place a piece of tape in a 7mm socket or nut driver."
11
Unthread the old orifice from the holder.
12
"Install the new orifice by inserting it into the socket or nut driver, then thread it into the holder."
13
Reposition the burner base so the igniter aligns with the notch in the base.
14
Thread the two mounting screws.
15
Realign the burner cap and grate.
16
Turn the gas supply back on.
17
Plug the power cord back in or restore the power supply.
18
Congrats! Your gas range is ready for use.

Applicable Product Model

Range/Stove/Oven
Model
Subtype
Gas
Product Diagram & Manuals
Parts Needed
Orifice
Orifice
$19.75
Total$0.00

Related Articles & Videos