Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Frigidaire Gas Range Inner Broiler Drawer Glide Replacement (316534200)

02:20
204
0
This video provides step-by-step instructions for replacing the inner broiler drawer glide on Frigidaire gas ranges.

All of the information in this video is applicable to the following brands: Frigidaire

Tools used: flat-head screwdriver, quarter-inch socket or nut driver & a quarter-inch wrench.

Step By Step Instructions

1
Frigidaire Gas Range - Model FFGF3052TSA
2
Gas Range Inner Broiler Drawer Glide Replacement
3
Tools Needed
4
"You will need a flat-head screwdriver, a quarter-inch socket (or nut driver), and a quarter-inch wrench for this procedure."
5
Pull out the broiler drawer.
6
Use a flat-head screwdriver to depress the outer glide retaining tabs to fully remove the drawer assembly.
7
Use a quarter-inch socket or nut driver to unthread the two front screws and the rear screw securing the inner glide assembly – you may need to use a quarter-inch wrench to loosen the front screw.
8
"Install the new inner broiler drawer glide assembly by aligning it on the drawer, then thread the three mounting screws to secure."
9
Pry the outer glide rail retaining tabs back out to secure the drawer once you reinstall it.
10
Align the inner glides with the outer glides and slide the drawer all the way in.
11
Congrats! Your gas range is ready for use.
Description
This video provides step-by-step instructions for replacing the inner broiler drawer glide on Frigidaire gas ranges.

All of the information in this video is applicable to the following brands: Frigidaire

Tools used: flat-head screwdriver, quarter-inch socket or nut driver & a quarter-inch wrench.
Step-By-Step Instructions
1
Frigidaire Gas Range - Model FFGF3052TSA
2
Gas Range Inner Broiler Drawer Glide Replacement
3
Tools Needed
4
"You will need a flat-head screwdriver, a quarter-inch socket (or nut driver), and a quarter-inch wrench for this procedure."
5
Pull out the broiler drawer.
6
Use a flat-head screwdriver to depress the outer glide retaining tabs to fully remove the drawer assembly.
7
Use a quarter-inch socket or nut driver to unthread the two front screws and the rear screw securing the inner glide assembly – you may need to use a quarter-inch wrench to loosen the front screw.
8
"Install the new inner broiler drawer glide assembly by aligning it on the drawer, then thread the three mounting screws to secure."
9
Pry the outer glide rail retaining tabs back out to secure the drawer once you reinstall it.
10
Align the inner glides with the outer glides and slide the drawer all the way in.
11
Congrats! Your gas range is ready for use.

Applicable Product Model

Range/Stove/Oven
Model
Subtype
Gas
Product Diagram & Manuals
Parts Needed
Total$0.00

Related Articles & Videos