Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Ryobi String Trimmer Carburetor Replacement #307160001

02:32
3k
20
This video provides step-by-step instructions for replacing the carburetor on a Ryobi string trimmer.

All of the information in this replacement video is applicable to the following brands: Ryobi

Step By Step Instructions

1
Ryobi String Trimmer - Model RY253SS
2
String Trimmer Carburetor Replacement
3
Tools Needed
4
You will need a T-25 Torx bit for this procedure.
5
Hot Hazard
6
"Before you begin, confirm the engine has cooled."
7
Spill Hazard
8
Be sure to perform this procedure with little or no fuel in the tank.
9
Depress the retaining tab to release the air filter cover then remove the filter.
10
"Using a T-25 Torx bit, unthread the mounting bolts securing the air filter housing and carburetor."
11
Unhook the z-end of the throttle cable from the carburetor.
12
Spill Hazard
13
"Note the orientation of the fuel lines, then detach the lines to remove the old carburetor."
14
Install the new carburetor by first attaching the fuel lines to the appropriate carburetor ports.
15
Connect the z-end of the cable to the carburetor throttle lever.
16
"Confirm that the outlet gasket is intact, along with the O-ring on the carburetor, then align the air filter housing and insert the bolts."
17
Position the assembly then thread and tighten the bolts.
18
Reposition the air filter in the housing and replace the cover.
19
Refill the fuel tank if necessary.
20
Congrats! Your string trimmer is ready for use.
Description
This video provides step-by-step instructions for replacing the carburetor on a Ryobi string trimmer.

All of the information in this replacement video is applicable to the following brands: Ryobi
Step-By-Step Instructions
1
Ryobi String Trimmer - Model RY253SS
2
String Trimmer Carburetor Replacement
3
Tools Needed
4
You will need a T-25 Torx bit for this procedure.
5
Hot Hazard
6
"Before you begin, confirm the engine has cooled."
7
Spill Hazard
8
Be sure to perform this procedure with little or no fuel in the tank.
9
Depress the retaining tab to release the air filter cover then remove the filter.
10
"Using a T-25 Torx bit, unthread the mounting bolts securing the air filter housing and carburetor."
11
Unhook the z-end of the throttle cable from the carburetor.
12
Spill Hazard
13
"Note the orientation of the fuel lines, then detach the lines to remove the old carburetor."
14
Install the new carburetor by first attaching the fuel lines to the appropriate carburetor ports.
15
Connect the z-end of the cable to the carburetor throttle lever.
16
"Confirm that the outlet gasket is intact, along with the O-ring on the carburetor, then align the air filter housing and insert the bolts."
17
Position the assembly then thread and tighten the bolts.
18
Reposition the air filter in the housing and replace the cover.
19
Refill the fuel tank if necessary.
20
Congrats! Your string trimmer is ready for use.

Applicable Product Model

Parts Needed
Total$0.00

Related Articles & Videos