Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Ryobi String Trimmer Muffler Gasket Replacement #630002032

03:27
247
2
This video provides step-by-step instructions for replacing the muffler gasket on a Ryobi string trimmer.

All of the information in this replacement video is applicable to the following brands: Ryobi

Step By Step Instructions

1
Ryobi String Trimmer - Model RY253SS
2
String Trimmer Muffler Gasket Replacement
3
Tools Needed
4
You will need a T-20 Torx bit and a T-25 Torx bit for this procedure.
5
Hot Hazard
6
"Before you begin, confirm the engine has cooled."
7
Use a T-20 Torx bit to unthread the five screws securing the recoil starter assembly to the engine cover and engine.
8
Set the recoil starter aside and unthread the four front screws securing the engine cover.
9
Heavy Hazard
10
"With the screws unthreaded, separate the engine from the cover."
11
"Using a T-25 Torx bit, unthread the muffler assembly mounting bolts."
12
Remove the assembly along with the old gasket if still intact.
13
Install the new muffler gasket by aligning it behind the muffler assembly then insert the mounting bolts.
14
Align the assembly on the engine then thread and tighten the bolts.
15
Realign the engine assembly with the cover and rethread the screws in front.
16
"Reposition the recoil starter on the engine assembly, making sure the recoil pulley engages with the starter pawls."
17
"Thread the screws to secure, keeping in mind the larger screws go on the bottom."
18
Congrats! Your string trimmer is ready for use.
Description
This video provides step-by-step instructions for replacing the muffler gasket on a Ryobi string trimmer.

All of the information in this replacement video is applicable to the following brands: Ryobi
Step-By-Step Instructions
1
Ryobi String Trimmer - Model RY253SS
2
String Trimmer Muffler Gasket Replacement
3
Tools Needed
4
You will need a T-20 Torx bit and a T-25 Torx bit for this procedure.
5
Hot Hazard
6
"Before you begin, confirm the engine has cooled."
7
Use a T-20 Torx bit to unthread the five screws securing the recoil starter assembly to the engine cover and engine.
8
Set the recoil starter aside and unthread the four front screws securing the engine cover.
9
Heavy Hazard
10
"With the screws unthreaded, separate the engine from the cover."
11
"Using a T-25 Torx bit, unthread the muffler assembly mounting bolts."
12
Remove the assembly along with the old gasket if still intact.
13
Install the new muffler gasket by aligning it behind the muffler assembly then insert the mounting bolts.
14
Align the assembly on the engine then thread and tighten the bolts.
15
Realign the engine assembly with the cover and rethread the screws in front.
16
"Reposition the recoil starter on the engine assembly, making sure the recoil pulley engages with the starter pawls."
17
"Thread the screws to secure, keeping in mind the larger screws go on the bottom."
18
Congrats! Your string trimmer is ready for use.

Applicable Product Model

Parts Needed
Total$0.00

Related Articles & Videos